turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this a ...

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 25 - 2000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg ...

• más información

Bezel, steady rest, lynette -Manufacturer: Homemade fits Meuser, bezel from lathe type MV SKV/2-1 -Bezel: max. passage Ø 370 mm -Center height: 460 mm -technical drawing: with the photos -Total dimensions: 910/255/H985 mm -Weight: 152 kg ...

• más información

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe type MV SKV/2-1 -Max. Passage: Ø 350 mm -Center height: 460 mm -technical drawing: with the photos -Dimensions: 820/270/H895 mm -Weight: 160kg ...

• más información

Luenette de un Lathe Meuser M4. Tadeloser muy buen estado. Diámetro máximo aprox. 260mm Altura máxima aprox. 450 - 460mm 2 Guías de rodillos y una guía de deslizamiento Dibujo aprox. masa más /menos 5mm Precio especial  ...

• más información

Código 231017 Descripción Taladradora radial Hacer MEUSER + CO Modelo M 50 R N.º de serie 39112 ¿¿¿¿Año Capacidad en Acero 60 50 mm Capacidad en Hierro Fundido 60 mm Rosca de corte en Acero 60 M 45 Corte de roscas en hierro fundido M 55 Cono de husillo 5 MC Radio del husillo: máx./mín. 1700/600 mm Recorrido del husillo 1100 mm Altura mínima / máxima del husillo / parte superior de la placa base 500 / 1400 mm Armadura de brazo 600 mm Carrera de la caña 310 mm Número de velocidades 18 Rango de velocidad del husillo 25 – 2000 rpm Número de avances del husillo 14 Rango de avance del husillo 0,06 – 0,80 mm/rev Tamaño de la pla ...

Diámetro de la placa frontal: 1400 mm Diámetro de giro sobre el soporte deslizante: 1400 mm Distancia entre ejes: 1500 mm Longitud de giro: mm Potencia total requerida: kW Peso de la máquina aprox.: T Dimensiones de la máquina aprox.: M  ...

• más información

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35.0 mm bore capacity in cast iron: 40.0 mm arm length: max. 1230 mm turning speeds: 50 - 2250 U/min spindle taper MT: 4 MK base plate: 2030 x 200 mm quill stroke: 220 mm quill feed: 0.04 - 0.40 mm/U total power requirement: 3.62 kW weight of the machine ca.: 1500 kg range L-W-H: 2100 x 1000 x 2570 mm Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to s ...