We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
ARBURG ALLROUNDER 221 K5 350-100 (2002) Máquina de moldeo por inyección Fuerza de cierre: 350kN Carrera de apertura: 200 mm. Altura de montaje del molde: 150-300 mm. Distancia entre columnas: 350-500 mm. Placas de sujeción de moldes: 221 mm. Diámetro del molde: 342 x 250 mm. Peso del mit. Móvil del molde: 75 kg. Fuerza del eyector: 24 kN Carrera del eyector: 60 mm. Motor de la bomba: 7,5 kW Tiempo de funcionamiento en seco: 14.1s Diámetro del tornillo: 25 mm. Longitud del tornillo L/D: 20 mm. Carrera del tornillo: 100mm. Volumen de inyección: 49 cm3 Peso de la pieza inyectada: 41 g/PS Presión de inyección: 2000 bar. Flujo de inyección: 54 cm3/s Velocidad tangenci ...
Máquina de moldeo por inyección usada fabricada por Arburg modelo Allrounder 221-75-350, nueva 1984. Fuerza de cierre: 350 kN/tonelada. Fuerza de inyección: 77 kN/tonelada. Tensión de funcionamiento: 380V, 50Hz. Calefacción: 3,4 kW. Motor de la bomba: 7,5 kW. Carga total: 10,9 kW. ...
Description: Serial number: 206722, clamping force: 350 kN, operating hours. 6,025 h (counter defective) it can be assumed that the machine has at least 45,000 h, screw diameter 20 mm, clamping area: HxW 331 x 456 mm, SEOLGICA control system Approx. Onsite Dimension. (l x w x h): 2,700 x 1,400 x 2,200 mm, weight approx.: 2,000 kg
Description: Serial number: 206723, clamping force: 350 kN, operating hours: 44,502 h, screw diameter: 15 mm, clamping area: HxW 331 x 456 mm, SEOLGICA control system Approx. Onsite Dimension. (l x w x h): 2,700 x 1,400 x 2,200 mm, weight approx.: 2,000 kg ...
Description: U-version can be pivoted horizontally/vertically can be used e.g. for inserts, Protective doors pneumatically operated. Before the machine was dismantled, it was run without heating up or spraying parts and the existing video was made. The flickering on the screen is only because of the frequency of the recording camera. Without funnel disc and documents. A copy of the operating instructions is available from another machine Approx. Onsite Dimension. (l x w x h): 2,700 x 1,400 x 1,700 mm, weight approx.: 1,200 kg
Control: Selogica Closure System: Knee Engine: 7.5 kW Heaters: 5.5 kW Polish language control ...
Fabricante: Arburg Tipo: 221K 350 - 100 Año de construcción: 09/2005 Control: Selogica Fuerza de cierre: 350 kN Tipo de bloqueo: Palanca de rodilla Espaciado de la barra de amarre: 221 mm Tamaño de la placa: 324 mm x 250 mm Altura de la herramienta: min 150 mm - 300 mm Distancia de apertura: 200 mm Espaciado de placa máx.: 350 mm - 500 mm Tornillo: 25 mm Volumen de carrera: 49 ccm / 41 gramo PS Presión de inyección: 2000 bar General Motor: 7,5 kW Calefacción: 4.6 kW Dimensiones: 2.7 m x 1.4 m x 2.2 m Peso: 1200 kg Extras opcionales Tren de núcleo x1 Canal en caliente integrado
B&A REF: 9039 TONELADA: 35 PESO DEL DISPARO: 64 DIÁMETRO DEL TORNILLO: 30 MM VOLUMEN DE LA BRAZADA: 70CM3 PRESIÓN DE INYECCIÓN: 1390AR TAMAÑOS DE PLATINA: 342 X 250 MM DBTB: 221 MM ALTURA MÍNIMA DEL MOLDE: 150 MM ALTURA MÁXIMA DEL MOLDE: 300 MM CARRERA DE APERTURA DEL MOLDE: 200 MM LUZ DIURNA MÁXIMA: 300 MM CARRERA DEL EYECTOR: 60 MM CONTROLES: SELOGICA MOTOR: 7.5 CAPACIDAD DE CALEFACCIÓN: 4.6KW
Closing unit Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 324 x 250 Clearance between columns (hxv) [mm] 221 x 221 Min./max. mold height [mm] 150-300 Maximum opening width [mm] 500 Injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 26 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 7.5 Heater power [kW] 4.5 Dimensions and weight Net weight with control cabinet [t] 1.06 Dimensions (length x width x height) [m] 2.7 m x 1.4 m x 2.2 m
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm). ...