Manufacturer | Manufacturer: WMW Type | Type: DLZ 355 x 1600 Stock number | Stock Number: 1009 Turning Length | Turning length: 1600 mm Circumferential diameter over bed | Swing diameter over bed: 355 mm Spindle bore | Spindle bore: 35 mm Tip Height | Center height: 180 mm RPM | turning speed: 112 - 2500 rpm Engine Power | Drive power: 5.5 kW Weight Machine | Weight of machine: 2,2 t

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm  ...

• more information

Turning length: 8000mm, turning diameter: 1000mm, bed width: 800mm, spindle bore: 72mm, speed: 1800rpm, spindle power: 19kW, weight: 15,600kg. On-site inspection is possible. ...

• more information

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

There are two identical Stanko lead and feed screw lathes and a WMW lathe available. 1/2) Russian Stanko factory 1M63, year of manufacture: 1974, turning diameter over bed/face slide: 630mm/350mm, center width: 2800mm, center height: 315mm, spindle bore: 70mm, speed: 1250rpm, power: 15kW, machine dimensions X/Y/Z: approx. 4900mm/1700mm/1300mm, weight: approx. 5100kg. 3) WMW DLZ 630 III 3150, year of manufacture: 1963, turning diameter over bed/plane slide/in the offset: 630mm/340mm/1200mm, offset length: 800mm, center width: 3150mm, center height: 315mm, spindle bore: 70mm, speed: 1120rpm, power: 15kW, machine dimensions X/Y/Z: approx. 7500mm/1500mm/1700mm, weight: approx. 11500kg. On-site i ...

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Code 151295 Description Facinglathe with center Make WMW NILES Model DP 1 / S 2 Serial number 261 526 149 Year of make 1986 Max. centerheight over base plate 1250 mm Max. swing over base plate 2480 mm Max. swing in Gap 3100 mm Distance between centers 4000 mm Max. workpiece weight betw. centers 10.000 kgs Spindle bore 100 mm Movement slide ( max. ) 1000 ( + 750 ) mm crossslide 630 mm toolslide 200 mm 18 Speeds 5,6 – 280 rpm Motorpower 45 kW Total power 55 kVA Machine weight total ± 18000 kgs Accessoiries 4 chuck facingplate of Ø 1250 mm Condition Machine is in very good condition

Transverse slide milling machine with digital display , used milling m/c with vertical head and DRO, used Hersteller/make: HECKERT Typ / model: FQW 400 Baujahr/ year: 1983 Tischgrösse/ table: 400 x 1600 mm Tool holder/ taper: ISO 50 max. table load: 1500 kg Verfahrweg längs / move longit.: 200 ... 1400 mm Verfahrweg quer/ move cross: 55 ... 505 mm Verfahrweg perject / move vertic.: 100 ... 525 mm Spindle speeds: 45 ... 2240 rpm in 18 steps Drive power of the milling spindle | load of spindle: 15 kW Connected load: 21 kW Masse/ weight: 4000 kg