; Power [PS]: 55; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250 ...

• more information

Kohler Diesel Generator Set 20 / 22 - NEW E-Start - AVR - 230 / 400 Volt - soundproofed - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller (+/- 1%) - - - - Equipment: - Electric start - AVR controller - 1x 230V 32A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter + phase selector switch - Hertz display - Operating hours counter - Emergency stop switch - - - - - Engine control unit: Shutdown / alarm in the event of the following events: - Fuel reserve - Engi ...

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diese ...

Aggregate type: mobile Execution: Soundproofed Technical data engine: Engine manufacturer: Kohler Engine: KDW1003 Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: LINZ Generator type: Alumen Generator power: 8 kVA Voltage: 400 / 231 Volt Power factor: Cos. - phi 0.9 Speed: 1500 rpm Switchgear: Execution: Key Startup Functions: Hand start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 66 Dimensions of the power  ...

Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.

2PCS x KOHLER ALTERNATOR 7M4054 NEMA CLASS H S/N 2286907 S/N 2287341 230/400 PHASE: 3 KW: 1416 KVA: 1770 AMP: 2555  ...

• more information

sheet width: 100 mm coil outside dia.: 800 mm weight max. in kg: 150 kg speed: 0 - 60 m/min total power requirement: 2 kW weight of the machine ca.: t dimensions of the machine ca.: 2,89 x 1,38 x 1,4 m : 2 x 150 kg band width: 100 mm diameter of the mandrel: min. 170 max. 540 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kohler unwinding reel with 9 roll straightening unit Last use Align copper L profile from coil, feed profile via balancing section. Specifications Number of rollers: 9 pieces Roll diameter: 30 mm Throughput width: 120 mm Belt speed: 0-10 m/min Belt speed control: Infrared via belt loop Working direction: left to right Belt inlet: left Measuring device: digital Roller mill adjustment: motorized Quick-change device: manual Engines Straightening machine drive: 5, kW drive at 3000 rpm Oil pump: 0.06 kW power at 1300 rpm Roller mill adjustment: 0.15/0.6 kW at 81/344 rpm Total drive power: 10 kW Voltage: 380 V Weight 6 t Unwinding reel type 300.2 Load capacity: 2 x  ...

Bandwidth 180 mm Plate thickness 2 mm Max. coil weight 2 X 500 Kg Max. coil-diameter 1200 mm Feeding speed 0 - 60 m/min Straightening rolls 30 mm Number of straightening rolls 9 pcs Max. power 6 Kw  ...

• more information

Motorized double reel make KOHLER type 500.1Year 1984Max. Coil diameter: 1000 mmMax. Coil width: 450 mmCoil weight each: 500 kgDrive power: 2 x 1.5 kWOutside dimensions approx.: 1400 x 1400 x 2000 mmFloor space approx.: 1400 x 1400 mmWith- manual twist- manual spread- Loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools