| Description: |
Window installations WEINIG Unicontrol 12 CNC
used machine
Tenoning spindle: 2 St.
Number of milling agregates: 7
St.
Spindle diameter: 50 mm
control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial CNC spindles as
well as VARIO table and milling carriage
Machine can be seen
in use for a short time!
Technical data summary
(please
inquire about any additional accessories included)
crosscut saw
> Electronic crosscut saw,
horizontally infinitely adjustable
> Number of tools: 1
piece.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40
mm
> Tool diameter max.: 400 mm
> Motor power: 3.7 kW
>
Laser directional light to detect the saw section
> Axial
adjustment path 150 mm NC axis, electronically infinitely
variable
> Radial pneumatic adjustment path 8 positions for e.g.
edge rounding from above
Rounding aggregate
>
Position: horizontally below
> Motor power: 1.5 kW
> Spindle
diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed:
9,000 rpm
> Tool diameter: max. 130 mm
> Axial adjustment path
mechanically coupled with crosscut saw.
> Radial adjustment
pneumatically controlled on/off
electronic length stop
> Length 4500 mm
1. Tap and slot spindle
>
Number of tools: variable
> Motor power: 15 kW
> Spindle
diameter: 50 mm
> Tool clamping length: 640 mm, with counter
bearing
> Axial adjustment path: 580 mm NC axis, continuously
variable
> Spindle speed: 2,800 rpm
> Tool diameter: max. 400
mm
> Overtravel counter, complete clamping length is
countered
2. Tap and slot spindle
> Number of
tools: variable
> Motor power: 15 kW
> Spindle diameter: 50
mm
> Tool clamping length: 640 mm, with counter bearing
>
Axial adjustment path: 580 mm NC axis, continuously variable
>
Spindle speed: 2,800rpm
> Tool diameter: max. 400 mm
>
Overtravel counter, complete clamping length is
countered
Transfer tape
Included for transferring
the parts to longitudinal machining
Separation of double parts
before the start of longitudinal processing.
1. Profiling
spindle (synchronous and counter-rotation)
> Position:
vertical right
> Number of tools: variable
> Motor power: 11
kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm,
with counter bearing
> Axial adjustment path 350 mm NC axis,
infinitely variable
> Radial adjustment path 80 mm NC axis,
infinitely variable
> Spindle speed: 6000 rpm
> Tool flight
circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 2 feed
rollers axially pneumatically controlled opposite the spindle,
8
positions
> Table top pneumatically controlled to the tool
diameter
2. Profiling spindle
> Position:
vertical right
> Number of tools: variable
> Motor power: 11
kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm,
with counter bearing
> Axial adjustment path 350 mm NC axis,
infinitely variable
> Radial adjustment path 80 mm NC axis,
infinitely variable
> Spindle speed: 6000 rpm
> Tool flight
circle min.: 140 mm
> Tool flight circle max.: 232 mm
> 2 feed
rollers axially pneumatically controlled opposite the spindle,
8
positions
> Table top pneumatically controlled to the tool
diameter
3. Profile milling unit (grooving device from
above)
> Position: horizontal at the top
> Motor power:
3.7 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40
mm
> Axial adjustment path 30 mm NC axis, infinitely
variable
> Radial adjustment path 125 mm NC axis, infinitely
variable
> Spindle speed: 9000 rpm
> Tool flight circle max.:
130 mm
> Position: vertical right
> Number of tools:
variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
>
Tool clamping length: 400 mm, with counter bearing
> Axial
adjustment path 350 mm NC axis, infinitely variable
> Radial
adjustment path 80 mm NC axis, infinitely variable
> Spindle
speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool
flight circle max.: 232 mm
> 1 feed roller axially pneumatically
controlled opposite the spindle,
2 positions
4. Profiling
spindle
> Position: vertical right
> Number of tools:
variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
>
Tool clamping length: 400 mm, with counter bearing
> Axial
adjustment path 350 mm NC axis, infinitely variable
> Radial
adjustment path 80 mm NC axis, infinitely variable
> Spindle
speed: 6000 rpm
> Tool flight circle min.: 140 mm
> Tool
flight circle max.: 232 mm
> 2 feed rollers axially pneumatically
controlled opposite the spindle,
8 positions
> Rung support
bar clocked vertically after the last profiling spindle
5.
Profile milling unit (fittings spindle)
> Position: vertical
right
> Motor power: 3.7 kW
> Spindle diameter: 40 mm
>
Tool clamping length: 160 mm
> Axial adjustment path 115 mm NC
axis, infinitely variable
> Radial adjustment path 100 mm NC axis,
infinitely variable
> Spindle speed: 5850 rpm
> Tool flight
circle max.: 210 mm
> 1 feed roller axially pneumatically
controlled opposite the spindle,
2 G41212123
positions
6. Profile milling unit (grooving device from
above), in the additional stand
> Position: working
vertically to the right from above
> Motor power: 3.7 kW
>
Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Axial
adjustment range 44 mm, 8 positions using a pneumatic turret
>
Radial adjustment path 100 mm NC axis, infinitely variable
>
Spindle speed: 9,000 rpm
> Tool flight circle max.: 130
mm
7. Profiling spindle (grooving device from below, in the
additional stand)
> Position: horizontally below
> Motor
power: 3 kW
> Spindle diameter: 40 mm
> Tool clamping length:
125 mm
> Axial adjustment path 100 mm NC axis, infinitely
variable
> Radial adjustment path 100 mm NC axis, infinitely
variable
> Spindle speed: 5850 rpm
> Tool flight circle max.:
200 mm
> 1 feed roller axially pneumatically controlled opposite
the spindle,
2 positions
Other features
> online capable
> Folding device for tear-free
folding
> Milling carriage for milling sashes with frame widths
under 500 mm.
Automatic pneumatic clamping
> 9 feed rollers
controlled up/down after the last profiling spindle
faster and
shorter milling process
> Feed height adjustment with NC
axis
> Divided pressure ruler on the left, pneumatic, divided for
wood widths 40-140
mm
> Double parts package
> Return
conveyor for 1-man operation: slat conveyor
> Screen
controls
> Slanted window device
> Electronic angle display
for sloping windows
> Control: NEXUS PC control
> Vario table
with horizontal NC axis
> Automatic central lubrication
> Air
conditioning unit in the control cabinet
> Machine without
processing tools
If the technical characteristics of
this machine do not meet your expectations
correspond, please
contact us. Our long-standing
Our experienced team will be happy
to support you with any adjustments or
Find a machine that meets
your needs!
(Technical information according to the
manufacturer - no guarantee!)
The data for
this ad was created with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2728
|