Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - ...

approx. 33600 switch-on hours swing over bed 570 mm, over support 340 mm Center width 2000 mm Speed range (1/min) Level 1: 1-625, Level 2: 4-2500 Spindle bore 83 mm Tailstock quill D 80 mm, mount MK 5 Main drive 20/17 kW, connected load 30 kW Incl. Control Siemens Tool turret 8-speed Sauter Chip conveyor with coolant device Mayfran Movable chip protection cover 3-jaw chuck Schunk Rota S 250 Manuals

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Turning diameter: 900 mm Turning length: 4500 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Siemens Sinumrik Front and Rear chuck 885 mm Multi fix tool system Max. turning Ø:900mm X-Axis:        590mm Z-Axis:        4500mm Spindle bore:  355mm Speedrange:    500Rpm Spindle power: 45kW Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       140mm Length:        6900mm Width:         2600mm Height:        2200mm Weight:        10500kg Please Note: The information on this page has been obtained to the b ...

turning diameter:160 mm turning length:500 mm weight of the machine ca.:4 t This machine comes from a training workshop. Technically, the machine is fully functional and in a well-maintained condition.  ...

• more information

Turning diameter: 570 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Swing over bed Ø 570 mm Swing over cross slide Ø 340 mm DBC Turning Length 1000 mm Bed width 350 mm Tailstock spindle Ø 80 Ø Spindle taper 5 Mk Workpiece weight 1300 Speeds / ranges 2500 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 5000 mm/min.

Turning diameter: 720 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Schunk Rotojet 500 mm Parat tool holder Chip conveyor Coolant system Swing over bed Ø:        720mm Swing over cross slide Ø:430mm DBC Turning Length:      1000mm Spindle bore:            106mm Spindle power:           37kW Bed width:               480mm Tailstock spindle Ø:     115Ø Stroke pinole:           6mm Workpiece weight:        3400 Speeds / ranges:  ...

Weiler automatic lathe UD 24 CNC Siemens 820T P1 65574 P2 28618 380 V 11,25 KW Without tailstock Hydraulic feed and clamping Accessories  ...

• more information

Turning diameter: 1100 mm Turning length: 3000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Manual Turn CNC latheWEILER - E 110 / 3000 MACH-ID 8510 Make: WEILER Type: E 110 / 3000 Control: SIEMENS 810D Manual Turn Year: 1996  Swing over bed Ø:        1100mm Swing over cross slide Ø:830mm DBC Turning Length:      3000mm Spindle bore:            128mm Spindle power:           45kW Bed width:               600mm Tailstock spindle Ø:     140Ø Spindle taper:           6Mk W ...

Turning diameter: 730 mm Turning length: 2000 mm Turret positions: 1 CNC Brand: Siemens Teach-in latheWEILER - E 110 / 2000 MACH-ID 7777 Make: WEILER Type: E 110 / 2000 Control: Siemens Sinumrik Year: 1997  Swing over bed Ø:        1100mm Swing over cross slide Ø:730mm DBC Turning Length:      2000mm Spindle bore:            128mm Spindle power:           55kW Bed width:               600mm Tailstock spindle Ø:     140Ø Stroke pinole:           300mm Spindle taper:      &nbs ...