It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). S ...

Thermally insulated hall, whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. WALL CLADDING: Sandwich panels, grey-white on wall substructure made of cold-formed and galvanised lightweight profiles. LOCATION: South Eifel, Rhi ...

Insulated steel hall 30x60x6/8.6m with crane runway on 15x60m and a row of central supports in the fifteen-metre axis, which is to be dismantled in the short term. It is a thermally insulated hall whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. At the time of planning, a snow load of 0.75 kN/m² was assumed. The structural engineer must check whether there are suffi ...

It is a steel skeleton construction made of hot-rolled steel profiles. Since even the roof purlins are made of hot-rolled profiles, there are sufficient static reserves for a solar system. The dimensions as per drawing: Hall width: approx. 21.40 m AK wall (12.5+5+3.5m); Hall length: approx. 25.40 m AK wall; Frame spacing: approx. 5.00 m; Eaves height: approx. 7.07 m OK steel frame of the crane hall; ca. 3.32 m OK of the hall towing; Ridge height: approx. 8.32 m OK steel of the crane hall at the ridge node; ROOF & WALL: The building envelope is disposed of as it cannot be reused. DOCUMENTATION: The original construction documents from 1981 are available. N ...

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames ...

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

The three-aisled hall with the reference no. hbs4003s3 as well as the hall complex with the reference no. hbs1767sp are in good condition and can be rebuilt elsewhere. Description of the three-aisled hall: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. At the time of planning, a snow load of 0.75 kN/m² was assumed. The structural engineer must check whether there are sufficient reserves for higher snow load zones or which reinforcement measures are required to strengthen the suppor ...

It is a thermally insulated hall whose supporting structure and parts of the building envelope as well as various accessories can be reused. APPROXIMATE DIMENSIONS BG area: approx. 1287 m² covered area; Hall length: approx. 60.15 m (AB.-1B 20 m and AB.-1C 40 m); Frame spacing: approx. 5.00 m MM truss; Hall width: approx. 21.40 m AK wall; ca. 21.09 m AK frame supports; System width: approx. 20.65 m MM Frame Columns; Eaves height: approx. 6.40 m; Ridge height: approx. 8.30 m; SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE 450 frame columns, IPE 330 frame supports, external gable columns such as HE-A 140 internal suppo ...

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Information Mo ...