Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

This Gimret UHT system is a continuous installation for sterilizing by heating, to ensure that a prepared liquid mixture is free from bacterial endospores, the mixture is passed through a sterilizer prior to the drying process. To obtain a continuous flow in the sterilizer, the material is first accommodated in a buffer tank from which the sterilizer is fed by using a dosing pump (low pressure). To kill the bacterial endospores a temperature of at least 135°C is required for a period of 5-7 seconds. To reach this temperature, steam is injected into the mixture that is dosed from the dosing pump. A meandering pipe works then realizes the required residence time at a set temperature of minimu ...

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use  ...

• more information

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wir ...

ZIEMANN BREWHOUSE 400 hl x 12 brews / day FERMENTERS Direct ammonia cooling 24x 1450 hl (total capacity) 4x 237 hl (total capacity) Fermentation, 24 fermentation tanks (1450hl) and Fermentation, 4 fermentation tanks (237hl gross) 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks 5 Glycol / ammonia heat exchanger KHS 40 CF 220 hl/h 6 Yeast station Ellinghaus 1991 3x49 hl + 1x111 hl 7 Yeast propagation station Ellinghaus 1991 1x500 hl + 1x2 hl + 1x7 hl No insulation 8 Buffer unpressurized tanks Ellinghaus 1991 289 hl 9 ...

Welding plant with FANUC robot Welding robot Fanuc 3,0m reach. 2 x 2000kg positioners 20m Robot Track Migatronic welding power source. Year 2004. Hours les than 500 Can handle large items very flexibly. The facility has 2 work areas, so that the robot can weld in one area, while new workpieces are being loaded into the other workstation. The robot is mounted on a track with a total running length of 20 metres. The robot is fully integrated with the manipulator´s axes, so welding can be done while the robot is moving and the manipulator is rotating. Find more here - / Contact us at -

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and t ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation o ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be ...