Machining center for cutting large beams with 5 axes electronically controlled Maximum height of beam to be cut 300 mm Minimum width of beam to be cut longitudinally 100 mm Sliding table transversal travel 600 mm Swivel surface rotation degrees from 0 to 345° Circular blade dimensions 800 mm Blade motor power HP 20 Maximum working width 650 mm Beam moving system with motorized rubber wheels and pneumatic upper pressers Roller benches of 5500 mm both in entry and exit

Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capac ...

Maximum saw diameter 350 3 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.3.2.  ...

• more information

Maximum saw diameter 350 You can call or write to us. We can speak and write German and Russian. You can also send messages in English 38.3.1.  ...

• more information

pneumatic extension of the unit maximum blade diameter 400mm Three-angle cutting adjustment pneumatic clamp year of production 2008 - machine not used motor power 4.5kW 105cm aggregate passage  ...

• more information

Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: 1 mtr each Work table to the left and right of the saw blade bevelled sheet metal behind saw cut for drainage of Trimming cuts 2-hand control device Front saw blade protection HM saw blade Optionally available: Pneumatic front guard (TR501/P) Upper protective device cutting range (TR501/G) zus. Roller table per mtr. (with roll 60 mm) manual stop 60 mm manual stop 250 mm pneumatic stop 60 mm pneumatic stop 330 mm HM saw blade Laser directional light 220 V

TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless mot ...

Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machi ...

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power ...