I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg V ...

Equipment: - Gluing part for hot-melt adhesive granules - Cross-cut saw unit - Flush milling unit at the top and bottom - Scraper unit for PVC edges - Buffing unit 2 motors - Control panel at the machine inlet Specifications: Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 45 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3075 mm

Equipment: - Quick-change gluing part for hot-melt adhesive -Auto. Edge magazine with roller plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running holding pressure rollers - Power Control PC 20+ control - Adjustable inlet ruler - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, scraper, program adjustment side strop rollers and pneum. 2-point adjustment vertical sensing rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Shape milling unit 1 x 0.35 kW - Scraper unit for PVC edging - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit Specifications Edge thickness 0.4 - 8 mm Roll separating max ...

Brandt Optimat KD-83-F Edge thickness 0.4 -12 mm Auto. Control panel - PLC control Pre-milling unit for attaching in front of the glued part Car. Edge magazine for roll and strip goods Gluing unit with rapid heating basin / INFRARED control Workpiece height 10 - 55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 12 mm edge thickness with changeover of 0-15° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 25° Scraper unit Buffing unit Soundproof booth CE version Machine is in EXTREMELY NEAT CONDITION from carpentry dissolution - craft business ex location

Edge banding machine Type: Optimat KDF 220 C Manufacturer: Brandt Year: 2014 Pre-mill Pneumatic adjustment Adjusting the thickness manually Pre-mill manually Tire pressure unit Glue units 2 x unit Tire capping unit Tire milling Tire rolling unit Tire silence Flat cidlina Machine in good condition, under power Find more here - / Contact us at -

Edge banding machine Type: Optimat KDF 660 C Manufacturer: Brandt Year: 2012 Tl. glued 8-80 mm Diamond pre-mill Upper application tub EVA+PUR 2x (Homag) Part and edge preheating Extended pressure zone Chopping aggregate - with overlap setting Profile milling 4 motor edge maker R2 (Homag) R1+R2 profile cidlina Flat cidlina 2x injection of chemical Cleaning brushes Return conveyor Machine in good condition, under power Find more here - / Contact us at -

Equipment: - Gluing part for hot-melt adhesive granules - Contact heating shoe for workpiece preheating - Automatic edge magazine for roll material and fixed lengths with roller plate, Ø800 mm - Pressure zone with pneumatically driven main pressure roller and special holding pressure roller - Inlet ruler with fixed joining dimensions 1, 2 + 3 mm - Centrally adjustable top pressure - Joining milling unit 2 x 2.2 kW 200 Hz - Flush milling unit, 2 x 0.27 kW, top and bottom with vertical and horizontal scanning, swivel range 0-15 degrees - Scraper unit for PVC edges - Buffing unit 2 motors, 0.09 kW each - Workpiece support extendable to 350 mm - Noise protection cladding including c ...

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional !  ...

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,  ...

• more information

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998