Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling tab ...

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained aer retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Mounng on boring machine with balancing and geometric and dimensional chec ...

Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.

Qty. 1 Second-hand extrusion press Mfc.: SMS – Schloemann Built: 1997 Force: 2200 MT Type: direct Operation pressure: 250 bar Billet dia.: 8” – 203 mm Length: 900 mm Force Main piston: 19.64 MN Feeding piston: 2.45 MN Retreat force: 1.18 MN Press stroke: 2100 mm Press speed: at force 22 MN (250 bar) up to 19.0 mm/sec. At force 15.4 MN (175 bar) up to 26 mm/sec.

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 ...

Qty. 1 Second-hand extrusion press Mfc.: SMS - Hasenclever Force: 2500 MT Built: 1990 Container for flat billets Width: 375 mm Height: 140 mm Billet length: 1000 mm Stem length, max.: 950 mm Consist of: Extrusion Press Body Cylinders Motors Hydraulic tank Qty. 2 Containers (8” & 9”)

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m  ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m  ...

1,800,000 TPY Mini mill for slab and hot rolled coil Tonnage per year 1,800,000 tons Type Slab + Strip in Coils Manufacturer SMS Caster type Curved and Straight Material size (Slab size): 55mmT x 900~1,560mmW x 20,000~43,000mmL 210mmT x 600~1,890mmW x37,790mmL Rolling Mills 4 Hi 6 Stands -Product size(coil): 1.4~16mmT x 900~1,560mmW - 28ton/roll And more machinery Please refer to the attached flyer for more details