pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm - in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Repr ...

pressure: 225 t chamfer lenght: 6050 mm Control: CYBELEC DNC 1200 PS total power requirement: 18,5 kW Accessories/equipment: - 2 bending aids in front of the machine - 2 support arms in front of the machine - CYBELEC DNC 1200 PS control unit - Pneumatic tool clamping at the top - crowning, die displacement - Axes controlled: Y1, Y2, X, R, Z1, Z2 - foot switch - Tool holder: - top: 26 mm EHT - bottom: 55 mm EHT Please note: This machine is an underfloor machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG ...

• more information

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 2250 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l Control: total power requirement: kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 3,90 x 1,80 x 3,00 m • Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented The data for this ad was created with ModulMWS - the software soluti ...

pressure: 175 t chamfer lenght: 4050 mm distance between columns: 3050 mm throat: 300 mm stroke: 240 mm stroke speed - idle stroke downwards: max. 140 mm/sec working feed: max. 9 mm/sec stroke speed -return: max. 130 mm/sec distance between table / ram: min. 370 - max. 610 mm control: CYBELEC DNC 880S total power requirement: 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 5,89 x 3,6 x 3,16 m - controlled axes: Y1, Y2, X, R - crowning - Bending aid - Control CYBELEC DNC 880S - swiveling operation, front right - 4x stop fingers manually adjustable - foot switch - 1 set of upper tools - 1 set of lower tool - 2x material support arms in front - side + rear protection - Oper ...

pressure: 125 t chamfer lenght: 4050 mm distance between columns: 3550 mm throat: 300 mm dayligth: 560 mm stroke: 240 mm back stop - adjustable: 5-1000 mm Control: CYBELEC Visitouch 19 total power requirement: 18,5 kW weight of the machine ca.: 14.500 kg Domestic equipments: - CYBELEC DNC 80 - front bending aid - Backgauge with 8 stop fingers - AKAS laser protection device in front of the machine - upper and lower tool - matrix shift - 2-hand operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 3550 mm Control: DNC 84 PS distance between columns: 350 table height: 900 mm stroke of ram: 270 mm total power requirement: 30 kW Accessories/equipment: - 2 bending aids in front of the machine - 2 support arms in front of the machine - CYBELEC DNC 1200 PS control unit - Pneumatic tool clamping at the top - crowning, die displacement - Axes controlled: Y1, Y2, X, R, Z1, Z2 - foot switch - Tool holder: - top: 26 mm EHT - bottom: 55 mm EHT Please note: This machine is an underfloor machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowni ...

Pressing force 800 kN Bending length 3050 mm Plunger stroke approx. 160 mm Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)  ...

• more information

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die