x-travel: 610 mm y-travel: 510 mm z-travel: 610 mm Control: WinMax table-size: 760 x 510 mm spindle taper:: SK 40 spindle turning speed range: 12000 U/min rapid traverse: 38 m/min total power requirement: 18 kVA equipped with: - CNC control WINMax (V10) with simulation graphics & handwheel - tool changer 30-fold - chip conveyor - Renishaw probe - coolant system - spindle cooler - tool package - 3 vises - CE mark Almost exclusively aluminum, brass or plastic parts were manufactured 7281h Power-On and 2272h Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle

 ...

• more information

Hurco VMX 50 - 40 T, Year of manufacture 2007, Winmax control, Travel X/Y/Z 1270/660/610 mm, New spindle with approx. 2,000 hours, Tool changer 40-speed, SK 40, Sgk99yjixz Spindle speed up to 10,000 rpm, Nc swivel rotary table, IKZ 20 bar, Conveyor  ...

• more information

The machine is in good technical condition. Table with T-slots - max. load 1750 kg. Table size 1270 x 610 mm. Travel axes X/Y/Z: 1067/610/610 mm. Spindle speed 12,000 rpm. Engine power 18kW. Spindle taper SK40. Number of tool slots 30/40. Max. tool length 300mm. Max. tool diameter 80/76mm. Max. tool weight 7kg. By prior arrangement, the possibility of a tour in progress.

Control unit Ultimax 4 X-Axis travel 760 mm Y-Axis travel 510 mm Z-Axis travel 610 mm X-Y-Z axis rapid traverse 30 m/min Table length 1020 mm Table width 510 mm Table load 750 kg Spindle taper SK 40 Spindle speed 10000 rpm Motor power 13.5 kW Tool magazine 24 positions Dimensions L 4000 x W 3000 x H 3200 mm Weight 4800 kg

HURCO VMX 50 machining center. Year 2003, 20.000 hours of use. Used for the manufacture of aluminum molds in a small company. Programming with Mastercam and on machine with both conversational and ISO system. Traverses of 1.200 x 600 x 600. 24 tool changer Touch screens, keyboard and mouse. Connectivity through 31/2 floppy disk drive and RS-232 ports. 16 GB hard disk Both external and internal cooling. 10.000 RPM/Max BT-40 New head and axles skids Perfectly maintained. All documentation is provided since purchase. Not in disuse. It is sold due to cease of business. It is started at least weekly. It can be seen and tested perfectly.

This HURCO VMX 64/50T (2001) Machining centers (vertical) machine was manufactured in 2001. It is equipped with a Ultimax 4 unit and has 3 axis (X = 1625 mm / Y = 860 mm / Z = 760 mm). The machine has a spindle speed of 6,000 rpm, a SK50 tool holder and a clamping surface of 1675 x 890 mm. In addition it comes with a Pocket milling with islands, Synchronised thread cutting, Ultinet and Ultipro II. See photo and video gallery for more details.