Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 09/2005 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.6 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1200 kg Optional extras Core train x1 Hot channel integrated

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzl ...

Control: Selogica Closure System: Knee Engine: 7.5 kW Heaters: 5.5 kW Polish language control ...

• more information

Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW.  ...

• more information

Closing unit Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 324 x 250 Clearance between columns (hxv) [mm] 221 x 221 Min./max. mold height [mm] 150-300 Maximum opening width [mm] 500 Injection unit Screw diameter [mm] 20 Injection volume [cm3] 31 Injection weight [g] 26 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 7.5 Heater power [kW] 4.5 Dimensions and weight Net weight with control cabinet [t] 1.06 Dimensions (length x width x height) [m] 2.7 m x 1.4 m x 2.2 m

Number of working hours : ONLY 596 25 Ton Machine is like new ...

• more information

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW. ...

• more information

Arburg 270U-250-70 (221) Description General information SKU: (221) Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 20 g Clamping force: 250 kN Stand: Used Screw diameter: 18 mm Injection pressure: 2500 bar Tie bar spacing: 270 x 270 mm Clamping plate size: 380 x 380 mm Tool installation height min.: 200 mm Control: Selogica Language: German Power: 35 kW Operating hours: 82,985 h Curmtbe2w8 Weight: 2100 kg Dimensions: 3m x 1.1 m Funnel: No Core Train: Yes Euromap: Yes

A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw  ...

Manufacturer/manufacturer: Arburg Typ/type: 420 C 1300-350 Year/year: 2008 Control/controller: Selogica Clamping force/clamping force: to 130 Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 45 mm Stroke volume/shot volume: 230 ccm spec. Spritzdr / injection pressure: 1670 bar General / General engine power: 22 kW Heating/heating power: 8 kW Dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m Weight/weight: 4300 kg