Te Koop: Fischer & Porter flowmeter DN 25 ABB COPA-XE d DE 47 Tatalum  ...

• more information

Te Koop: Fischer & Porter flowmeter DN 25 ABB TRIOWIRL VT41  ...

• more information

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

POR Super Oscar briquetting machine – after technical review – Italian production – year of production 2010 – sleeve and oil cooling – Odometer Reading 1659.10 mth TECHNICAL PARAMETERS: Briquette diameter 80 mm .max. Briquette Length 80 mm capacity 350 kg/h engine power 27.5 kW hydraulic crushing 1400 kg/cm2 .max. Operating Force 150 bar oil capacity 600 liters hopper diameter Ø 1200 mm container height 90 cm dimensions (length/width/height) 2500 x 1900 x 1800mm net weight 2400 kg Super Oscar PLUS is equipped with an enlarged feed drawer and specially hardened sleeves. The increased hardness of the sleeves has a positive effect on their service life, espe ...

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel

POR Super Oscar 27.5 kW briquette press – Italian production – year of production 2007 – sleeve and oil cooling – DTR TECHNICAL PARAMETERS: Ø briquette 80 mm max. briquette length 80 mm capacity 350 kg/h engine power 18.5kW+7.5kw+1.5kw = 27.5 kW hydraulic crush 1400 kg/cm2 max. working force 150 bar oil capacity 600 l tank diameter Ø 1200 mm tank height 90 cm dimensions (length/width/height) 2500 x 1900 x 1800mm net weight 2400 kg

Numerically controlled gantry milling machine PORĘBA FBA125 X3M with SINUMERIC 820S control. Type FBA 125 X3M Built in 1997 Distance between columns 1500 mm Working table dimensions: 3000x1000mm Max. Distance from the work table to the spindle 1250 mm X axis travel 3000 mm Headstock travel along the axle beam 1750 mm Travel of the headstock in Z axis 1000 mm Table load 12,000 kg Spindle (2 speed ranges) 2000 rpm, 30 kW, SK50 Manual tool change Currently, the machine is excluded from the production process.

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel  ...

; ready for immediate use  ...

• more information