x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm table surface area: 1100 x 585 mm rotary table dia.: 500 mm spindle taper: SK 40 spindle turning speed range: 5 - 6300 U/min spindle power: 11 kW no. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kW weight of the machine ca.: 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN TNC 426 Operating hours: 45357 Technical data Table length: 1200 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Spindle speeds: up to: 6300 (42´000) rpm Tool changer: number of tools: 20 Feeds: longitudinal from: 0 mm/min up to: 15000 mm/min transversal from: 0 mm/min up to: 15000 mm/min vertical from: 0 mm/min Milling spindle motor: 11 kW Machine´s weight about: 4690 kg Overall dimensions machine: Length: 4700 mm Width: 2100 mm Height: 2700 mm Various accessories: Rigide table High frequency spindle: 42000 rpm Manufacturer: FISCHER Set of toolholders Oil mist extractor: FIBARON

CNC vertical machining center MIKRON UCP 710 With path control Heidenhain TNC 426/430 Year of construction: 1998 Travel: X 710 Y 500 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: NC swivel rotary table NCRST 630 600 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots Full protection cabin with sliding doors and interior lighting Electronic handwheel Renishaw Tool Measurement Probe TS 27 R 3D probe infrared Renishaw MP 12 Conveyor Coolant device 4 pcs height-adjustable machine shoes Operating instructions

x-travel:710 mm y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup.

MIKRON VCP 710 high speed vertical machining center with HEIDENHAIN 426 control. Unique opportunity, machine in perfect condition. Including magnetic plane and all its mandrels. X axis travel 710 Y 600 Z 500. Spindle speed 18000 rpm, chip conveyor. ...

• more information

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0  ...

• more information

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 120 mm max. module: 2 Workpiece length max.: 130 mm Pitch min.: 6 max.: 325 Spiral lead: from: 2 mm up to: 5000 mm Spiral lead angle: from: 0 ° up to: 89 ° Milling cutter speeds: number (steps): 14 from: 140 rpm up to: 1870 rpm Feeds: number (steps): 13 from: 0.05 mm/min up to: 3.0 mm/min Voltage 50 Hz 3x: 380 Volt Power: 0.75 kW Total power required: 0.85 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1600 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426/430 Technical data Number of axis total: 3 Table length: 900 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y-axis): 550 mm Vertical travel (z axis): 500 mm Table load max.: 1600 kg Tool changer: Number of tools: 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 140 mm Tool lenght: 300 mm Max. tool-weight: 8 kg Time of tool changing: 5 sec Spindle nose: ISO: B40 Spindle speeds: from: 100 rpm up to: 12000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 426 / 430 Operating hours: 24453 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 1050 mm Table width: 590 mm Number of T-channels: 8 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 400 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer:: TC 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 250 mm Max. tool-weight: 6 kg Time of tool changing: 5 sec Average chip-t ...