Travel X/Y/Z: 250mm/150mm/120mm, U-/V-axis: 35mm/35mm, max. workpiece size: 400mm/270mm/100mm, max. workpiece weight: 80kg, wire diameter range: 0.05mm-0.20mm, wire tension range: 3N-18N, max. wire speed: 250mm/s, taper angle at 100mm workpiece thickness: +/-7°, working dimensions X/Y/Z: approx. Wire speed: 250mm/s, taper angle at 100mm workpiece thickness: +/-7°, working height: 1080mm, machine dimensions X/Y/Z: approx. 1900mm/2700mm/2100mm, weight: approx. 3800kg, operating hours: 35106h. Including jumbo feeder and external filter system gray hair. Without clamping device. Documentation available. On-site inspection is possible.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

Longitudinal X: 350 mm Cross Y: 250 mm Vertical Z: 220 mm Ampere: 0 A CNC Brand: _Unknown / Other CNC Model: Sodick Make: Sodick Type: A325 Mark25 Control: Sodick MARK 25 YOP: 1998 U Axis 80 mm V Axis 80 mm X-Axis:                 350mm Y-Axis:                 250mm Z-Axis:                 220mm Table size L x W / or ø:600 x 400 mm Table load:             450Kg Length:                 2.250 mm  Width:                 ...

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100  ...

X – Axis Travel (600 mm) Y – Axis Travel (400 mm) Z – Axis Travel (270 mm) U, V Axis Travel (80 x 80 mm) Wire Diameter Range (min ~ max) (0.10 ~ 0.30 mm) Work Tank Dimensions (W x D) (1040 x 780 mm) Maximum Workpiece Weight (850 kg)  ...

• more information

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm  ...

• more information

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm  ...

• more information

This SODICK VL 400Q Erosion machine was manufactured in 2017. It has a movement range of X400mm, Y300mm, Z220mm. Its tank Size is 860mm x 690mm and its control type is LN2W SODICK. Contact us anytime for further information. ...

• more information

Type: Wire EDM Machine Ident Number: 22606 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: SLC 400 G Premium + Year of construction: 2015 Travel: 400 x 300 x 250 mm [ X x Y x Z ] max. workpiece weight: 500 kg U / V axis: 150 x 150 mm Cutting in a water bath Radiator Working tank 850 x 610 mm Taper +/- 25° at tool height 130 mm Control SPW

Type: Wire EDM Machine Ident Number: 22604 Category: Wire EDM Machines / EDM Manufacturer: Sodick Model: VZ 500 L Year of construction: 2010 Travel: 500 x 350 x 250 mm [ X x Y x Z ] max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with automatic wire threading Cutting in a water bath U/V axes +/- 80 x 80 mm Taper 15° at 120 mm height Control LN2W