Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vert ...

Presto HPK 50 HS baler, built in 2013 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2013 Hours: 3788 Drive: 30 KW Press force: 500 kN Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Materials: paper, cardboard, foil The user manual is available in German. Remark: The upper, lateral and lower guide rails on the press table have been completely renewed. The machine is in working condition. It ...

Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual

Baler Presto CC 20 M, built in 2019, press force 20 t, with restraint. Specifications: Manufacturer: Presto Type: CC 20 M Year of Make: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website ...

Baler Presto CC 50 M, semi-automatic, year of construction 2015, press force 50 t, with lift-tilt device Specifications: Manufacturer: Presto Type: CC 50 M Year of Make: 2015 Hours: 1932 Press force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, foil The user manual is available in German. Remark: The machine is in good condition. It was inspect ...

ID3011 Presto Presses CC40V 4.2 t Channel baling press, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180 Channel baler, transportable in a hook lift container, pressing force 400 kN, channel cross-section 750×1100 mm, 15 KW drive power, with mobile extraction system Höcker Polytechnik Vacumobil V 180

Format: A3 // Paper format: ca 31x45cm  ...

• more information

Nominal volume: 20cbm Teaching weight: 4900 kg Permissible total weight: 15000 kg Length: 6200 mm Height: 2600mm Waste compactor/self-compacting container (also for paper) Find more here - / Contact us at -  ...

• more information

Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The c ...

Specifications H&G HG/SV 11, Presto SP screw compactor 15 pieces available, made between 2004-2014 Weight: 1 800 kg Year of construction: 2004-2014 Tank volume: 25 m3 Power supply: 400V/50Hz 11 kW New containers available for the presented screw press  ...

• more information