Sheet thickness max. 12 mm Sheet weight max. 330 kg Travelling distance - x 2520 mm Traverse path - z 300 mm Traverse path - y 1550 mm Cutting speed 20 m/min Fast feed speed X/Y/Z 80/80/60 m/min Positioning accuracy +-0.01 mm/500 mm mm Repeatability +/- 0.005 mm Table height 820 mm Opening size 550x1550 mm Compressed air 6/20 bar Total power requirement 10 kW Description: Turbo Blower replaced at 36,000 hours Alphapac 0015 SP compressed air dryer Cellar fume extraction unit type Vario T 1.5A RIEDEL PC 315.21-NE-LAS air conditioning unit Laser radiation within class 1 2500 x 5700 x 2300 mm 6500 kg unchecked loaded on truck

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 15062 production hours, of which 6815 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW. ...

• more information

Used Amada LCV 3015 B2 laser cutting machine Iron up to 20 mm Stainless steel up to 12 mm Aluminum up to 6 mm ...

• more information

X-axis: 3070mm, Y-axis: 1550mm, Z-axis: 100mm, max. workpiece weight: 920kg, cutting capacity VA: 0.5-4mm, steel: 0.5-4mm, aluminum: 0.5-5mm, control: AMNC/PC, connected load: 18.4kVA, length: 9300mm, width: 2900mm, height: 2000mm, weight: 12t. With laser source AJ2000 2kW, automatic material tower ASLUL300F1, LKI Wöldman, compact dust extractor and programming software. On-site inspection is possible. Available in February 2025.

Inv. Num. : 7433 Type: LC 3015 F1 NT Producer: AMADA Created: 2009 Parameters: 2018 GO: Resonator and Turbocharger Control System: Fanuc AF4000i-B Duty cycle: 21600 h Laser power: 4 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 11000 kg Equipment: Vacuum Cooling system

Manufacturer / Type: AMADA FOL 3015 AJ 4kW Year of manufacture: December 2013 (in operation at D&G since June 2015) Operating hours: Laser-ON 20,090 h (switch-on time 36,270 h) Visual condition: Very well maintained. Relatively few signs of wear despite comparatively high operating Operating power Functional condition: Laser output reduced to approx. 2000 kW due to individual defective laser modules in the resonator. 2000 kW due to individual defective laser modules in the resonator. Machine otherwise works perfectly - see current maintenance/service report dated 21/02/2024 Maintenance/service: Was carried out by the manufacturer at regular intervals in accordance with regulations car ...

Amada Laser LCG-3015 Hours in picture Designation: Laser cutting machine Type: LCG Model: LCG-3015 The laser was installed in Dec 2016 and has been running since Jan 2017 in single-shift operation for our production only. We cut mild steel up to 25 mm and stainless steel up to 12 mm. For more information, please refer to the operating instructions. The Amada runs in single-shift operation The machine would be available at the beginning of 2025. Find more here - / Contact us at -

2015 Amada LCG-3015 A laser cutting machine, model LCG-3015 with an AF3500i-C laser resonator The machine is in perfect condition Age 9 years and about 9000 operating hours General Specifications Model: LCG-3015 Laser Resonator: AF3500i-C Transport Measurements and Weights Machine without Transport Crate (L x W x H): 6617 x 2655 x 2166 mm Weight: 8200 kg Pallet Changer (L x W x H): 3415 x 2240 x 845 mm Weight: 3000 kg Transport Dimensions Pallet Changer (L x W x H): ~3800 x 2350 x 1300 mm Weight: ~3300 kg Air Supply Requirements General Air Supply (when air is not used as cutting gas): 6 bar; 98 m³/h 6 bar; 75 m³/h 6 bar; 18 m³/h 6 bar; 5 m³/h Air Supply (when air is  ...

We would like to sell our used laser cutting machine Amada, type LC-3015, built in 1997 due to lack of space: Table length :3000mm, Table width: 1500mm, Laser power 3kW, Hours: 8103, max. table load of the exchange table 750Kg, Max. cutting thickness 20mm (normal steel) 12mm (stainless steel), Procedure speed X,Y/Z 40/20m/min , Extraction, cooling BKW The Falgenbalk has been renewed by us.

Resonator power 4000 W 2000 W Working range X and Y: 3420 x 1550 mm Z-axis working range: 200 mm Max. table load: 920 kg CNC: AMNC3i Weight: 10500 kg ...

• more information