Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: ...

Injection moulding machines ENGEL Victory 1050-220 TECH Stock No.: 503559 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of Make: 2006 Hours: 62149 h Technical data closing page Clamping force: 2200 kN Plate size h x v: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Opening travel: 755 mm Ejector stroke: 180 mm Ejector force: 80 kN Centering of movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 230 min Plasticizing current: 55 g/s PS Outdoor injection flow: 255 g ...

Engel Victory 1050/220 POWER (2007) Tiebarless machine Control : CC200 Clamping force: 220 t Screw size: 55 mm Material: POM Cores: 2 Air valve: 2  ...

• more information

Engel Victory 1050/220 POWER (2004) CC200, new pump Clamping force: 220 t Screw dia: 55 mm Platen size: 860x830mm Injection volume: 511 cm3 Type: Horizontal Drive: Hydraulic New pump, hoses etc.  ...

• more information

Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling. ...

• more information

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x h ...

Engel Victory 1050/200 Tech Ecodrive / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 55 mm Injection weight: approx. 485 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 200 t Spar spacing: 0x0 mm Size of the clamping plates: 850x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 40,000 in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners x 8 Injection unit is wear-resistant ...

Engel Victory 1050/160 Tech Ecodrive / Operating hours: approx. 35,000 h in automatic mode Year of Make: 2012 Injection unit: Screw diameter: 55 mm Injection weight: approx. 485 g Spray pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 850x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 35,000 in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners x 8 Injection unit is wear-resistant ...

This Engel Victory 750H/330V/220 combi was manufactured in 2011. Its a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 750H/330V/220 combi. Contact us for more information. ...

• more information

This Engel victory 500H/200V/220 combi was manufactured in 2021. Its a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel victory 500H/200V/220 combi. Contact us for more information. ...

• more information