| Description: |
Travelling column milling machines PARAPS SHARK ONE
used machine
TECHNICAL DATA SHEET
CNC – Travelling column milling machine
Make PARPAS
Type SHARK One
Control HEIDENHAIN iTNC 530 HSCI
Year of construction 2016
Travel
Longitudinal movement (X-axis) 3,500 mm
Transverse movement (Y-axis) 1,083 mm
Vertical movement (Z-axis) 1,074 mm
Clamping table
Clamping surface 4,000 x 1,000 mm
Threaded holes with fitting seat
Feeds
X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min.
Rapid traverses in X / Y / Z 30 m/min
feed force of the axes 10,000 N
2-axis milling head
2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis
simultaneous machining
Power at 100 % ED 29 kW
Speed range, infinitely variable 0-18,000 min-1
torque 92 Nm
Rotational speed axis A/C 60 min-1
Tool holder HSK 63A – DIN 69893
Clamping force A-, C-axis 2,300/4,000 Nm
Automatic tool changer ATC
Tool stations 30 places
Tool diameter max. 90 mm
Tool length max. 320 mm
Tool weight max. 8 kg
Changing positions vertical
Guides, drive and measuring systems
• All axle drives with digital drives Fabr. HEIDENHAIN
• Direct measuring systems for X-, Y- and Z-axis Fabr. HEIDENHAIN
• X-, Y- and Z-axis guidance by means of high-precision linear
guides for maximum precision and dynamics
• Precision ball screws with prestressed nuts in X, Y and Z axes
Coolant system with chip conveying
• Coolant outlet, switchable from coolant to air, on the front side
of the milling head via manually swivelling nozzles
• Internal coolant supply, switchable from coolant to air, through
the spindle center.
• Tank volume approx. 1,000 l
• Normal coolant supply 25 l/min 5 bar
• High pressure pump for internal cooling 20 l/min 50 bar
• Coolant tank incl. cartridge filter and paper belt filter system
• Hinge belt chip conveyor, discharge height approx. 750 mm
Dimensions, weight
Machine area approx. 8.3 x 6.7 m
Total height approx. 3.60 m
Machine weight approx. 28,000 kg
Electrical connection values
Power consumption 120 A
Operating voltage 400 V
Operating frequency 50 Hz
Equipment / Accessories
• Machine bed, stand and vertical caliper as a welded steel
construction annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C and A axis
drive via torque motors
• Oil cooling unit for cooling the milling head
• Thermal compensation by cnc
• Spindle drive 29 kW
• Spindle speed max. 18,000 min-1
• Axis drives using precision recirculating ball screws and digital
servo motors
• Measuring probe system Fabr. BLUM, TC 63-30 with radio
transmission and autom. Measurement cycles
• Milling head measurement Kinematics Opt
• Laser tool presetting device BLUM – version NT mounted on the
machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive
technology
• Portable electr. F41227320 Handwheel HEIDENHAIN HR 520 with 3 m
spiral cable
• Swivel control panel for machine operation in front of the
machine
• Autom. Tool changer with 30 magazine slots, changing position
vertically
• Coolant system with outer shower ring and IKZ through the
spindle
• 1 chip conveyor in the working area, ejection on the right
• Prestressed linear guides in all axes
• Precision ball screws in all axes
• Direct measuring system in all axes
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slider above and below in the vertical axis with bellows
covers with attached stainless steel amels closed
• Work space enclosure closed on all sides. Back of the work area
with bellows
cover closed with attached stainless steel slats.
The manual sliding doors on the front of the machine can be used on
the entire
Open the length of the clamping table.
Safety fencing for the rear machine area with two fused
Access doors.
• Control cabinet air conditioning
• Hydraulic system
• Work room lighting
• Extraction system Fabr. REVEN
• Black/white lacquering
• Ca operating hours: control 28,300 h, machine 27,300 h, program
run 11,400 h
seller offer No. resale 1592
|