Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to ans ...

WALTER HELITRONIC POWER PRODUCTION CNC Grinding Machine no. 650130 (REF. PF-014) HMC 500 Machine Power 24 kW Total power machine requirement 35 kW Machine can be Open and Run 3500x2400x2450 mm 4650 kg in working order loaded on truck ...

• more information

Fabrication number: 270 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connection: 7 kW Centre height above table: 135 mm Centre width: 535 mm Largest sanding diameter: 265 mm Largest sanding length: 430 mm Tool holder: ISO 50 Table clamping surface: 890 x 130 mm Largest longitudinal movement: Manual: 400 mm Automatic: 360 mm Transverse adjustability: 220 mm Vertical: 230 mm Pivoting to 2 sides: 90° + 45° Grinding wheel diameter: 200 mm Width: 80 mm Bore: 20 mm 2500 x 1000 x 1800 mm 800 kg unchecked loaded on truck

Max. Diameter between Centres: 265 mm Length between Centres: max. 430 mm Dimensions between spindle nose and tailstock: 535 mm Longitudinal movement: Manual: 400 mm Automatic: 370 mm Transverse movement: 220 mm Length: 890 mm Width: 130 mm Pivotability: 135° Sanding head can be swiveled around vertical axis: 360° Can be swiveled around the horizontal axis: 220° Vertically adjustable: 230 mm Sanding spindle diameter: 70 mm Speed: 1400 - 5000 rpm Grinding wheel diameter: max. 200 mm Bore diameter: 20 mm Workpiece spindle holder: ISO 50 2500 x 1500 x 1700 mm 400 kg unchecked loaded on truck

Walter WDPP-410 edger The WDPP-410 flashing machine is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick recovery of purchase costs and limiting raw material losses to a minimum. Reliable operation and safe operation of the saw translate into a high efficiency rate. – Polish production – DTR, CE min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW en ...

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal ...

 ...

• more information

 ...

• more information

- for Walterwerk Kiel Jupiter baking oven - for different angles and cone lengths  ...

• more information

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price ...

• more information