complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition  ...

• more information

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630  ...

Battenfeld Plastic Enjection Machine 130 ton Type : TM 1300/750 Width between columns 47cm height 46cm Year of manufacture : 1999 PC : Microstar 6 inch Screw diameter : Ø50 mm Hydro engine : MS 500 / MS+hydraulic Weight of machine : 6 ton Labeling: Turkish Display Text: Turkish Manual: Turkish

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Battenfeld HM 1300/750 Clamping force: 130t Year of Make: 2004 Injection weight in hp: 340g Injection Unit .../750 Screw diameter: 45 mm Spec. Spray pressure: 2115 bar Spray volume: 358 ccm Injection weight in hp: 340 g L/D Screw Ratio: 22 Clamping unit 130/... Clamping force: 130 t Size of the clamping plates: 760 x 755 mm Lights spar spacing: 520 x 470 mm Ejector force: 41 kN Tool installation height: 275 mm Opening travel: 575 mm Max. panel spacing: 850 mm Ejector travel: 200 mm Weight: 6100 kg Dimensions(m) LxWxH:4.8 x 1.5 x 2.2 m Control type: Unilog B4

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows program ...

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection ...

Injector in perfect operation. Low consumption. Sold for purchase of a machine of higher tonnage. In good condition. Robot NOT included. ...

• more information

Clamping force: 1650kN, opening stroke: 420mm, tie bar distance: 500mm/500mm, screw diameter: 45mm, injection weight: 260g, mold height min./max.: 200mm/470mm. Machine dimensions X/Y/Z: approx. 5000mm/1500mm/2000mm, weight: approx. 6000kg, operating hours: 34827h. Documentation available. On-site inspection is possible.

Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE