General Manufacturer: GF AgieCharmilles Type: CUT 300 Sp Year of Make: 2014 Travel: X 550 mm Y 350 mm Z 400 mm Main drive Working current: 18 A Wire diameter: 0.15 – 0.33 mm Workbench Table surface: 850 x 550 mm Workpiece weight: max. 400 kg Dimensions and weight Dimensions: 2,600 mm x 2,600 mm x 2,340 mm Weight: approx. 2,850 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Best Surface Ra 0.08 um Konik 30° / 100 mm

AGIE CHARMILLES CUT E 600 WIRE ERODER MACHINE Excellent Running Condition Model - CUT E 600 YEAR 2019 CONTROL - GF Charmilles WORK AREA 1030 x 800 x 350 mm MAX. PART WEIGHT 1000 kgs LEVEL OF DIELECTRIC MIN./MAX. 0/380 mm AIR SUPPLY PRESSURE 6.5-8 bar AIR MIN FLOW 150 L/min TRAVEL X, Y, Z 600 x 400 x 350 mm TRAVEL U, V ± 50 mm X, Y, U, V, Z MOVEMENT RESOLUTION 0.1 um SPEED OF AXIS MOVEMENT (XYZ) 0-3 m/min MACHINE DIMENSIONS 2160 x 3400 x 2320 MACHINE WEIGHT 4230 KGS Includes: TAPERING FACILITY CAM EASY SOFTWARE 0.1 mm MINIMUM WIRE CAPACITY SLUG JET FLUSH FEATURE Viewing available under power

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use  ...

• more information

Extruder with vacuum vertical prepress LVP-35, gearbox overhauled in 2011, screw wings equipped with carbide. Press equipped with DC motor 60 kW (can be converted to 55 kW three-phase motor at an additional cost). Machine is functionally tested and comes with some spare parts.  ...

• more information

Extruder with vacuum pre-press LVP-35, gearbox refurbished in 2011, extrusion helix plated with hard metal bits. Press is equipped with a 60 kW DC drive (can be replaced by a 55 kW AC drive at anextra charge). The machine is test-run and comes with spare parts.  ...

• more information

Upgrade with original GFM CNC in 2006 General upgrade by GFM in 2011 (worked only 9352 Hours, after) also the oscillation brake has been replaced by a hydraulically operated oscillation system Force of each hammer 200 tons Total Forge Tonnage 800 tons Strokes/min 580 Max Forging bar diameter 160 mm Max Squares with 140 mm Hammer length 326 mm Diameter of adjustment range 100 mm Forge eccentricity 6 mm Feed of Manipulator A 4.800 mm Feed of Manipulator B 5.200 mm Workpice length at lateral unloading 4.000 mm Manipulator spindle I.D. 111 mm Total installed power 450 kW Machine weight 117 tons

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight app ...

Type: 2SQ4000/1800, circular-swinger, screen area: 1,800 x 4,000 mm, with new semi-mobile steel construction with platform for service and maintenance, sand-blasted and new coloured ...

• more information

Box with crankshaft fress  ...

• more information

Manufacturer: Güntner GFH080. 3 B / 2 x 5 medium: water glycol 70 / 30% Medium temperature: 90º occurs C.Austritt 70 ºc. Cooling capacity: 2100kW air temperature: 30ºc. Fans: 10 piece, 1, 5kW, 400V, 50 Hz, 3 wire Connection: DN 100, exit is 2 x 2 x DN 100 Dimensions: Lxwxh = 12. 000x2300x1450mm Weight: 2500kg Sound pressure level: 54 dB(A) 10 m distance, year of construction: 2012 Condition: Very good, slats OK, tightness Jenbacher, tested emergency cooler, dry cooler, dry air coolers, drycooler, glycol coolant