Angebot/Offer: > > KM350-750-380 CXZ > > Year: 2013 > > Control : MC5 > Clamping force: 350 tons > > Tie bar distance HxV: 800 x 710 mm > > Max./Min. mold height: 920 x 380 mm > > > Main injection unit SP 750 > > Screw diameter: 50 mm > > Injection volume: 393 cm3 > > Shot weight: 358 g > > Injection pressure: 1892 bar > > > 2nd Injection unit SP 380 > > Screw diameter: 35 mm > > Injection volume: 154 cm3 > > Shot weight: 140 g > > Injection pressure: 2429 bar

B&A REF: 9024 TON: 160 SHOT WEIGHT: 343 SCREW DIAMETER: 50MM STROKE VOLUME: 3477CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR CIRCUIT: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 34,000 h in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Spray pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch screen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pu ...

Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible.

Description with hoist it changes molds ...

• more information

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

TECHNICAL SPECIFICATIONS Machine: KRAUSS MAFFEI 230T 750 AX year 2012 Year : 2012 Type of inspection : Number of hours: 37000H Storage location : FRANCE Closing Screws: 45 Cm3: 318 Between columns: 610x560 Tray size 880x830 Tray spacing:1230mm Min/max:250/680 Max. opening stroke: 550mm Ejector stroke:130 mm Dimensions: 6.50x2.11x2.05m Injection : Motor power: 38kw Heating power:15.5kw Weight: 11t General : Motor power: 38kw Heating power:15.5kw Weight: 11t 4 Kistler 8 integrated hot runners Prepared for hydraulic core connection Euromap 18 Euromap 67 1 pneumatic core 20ma interface 3 programmable inputs and outputs 5 free contacts Options : X: 900mm ...

MC5 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Closing unit - Mold clamping force: 1760 kN - Mounting plate dimensions (h x v): mm 790 x 740 - Clearance between columns (h x v): mm 560 x 510 - Way of opening the mold max: mm 450 - Height of the mold development min./max: mm 200/600 - Plate opening stroke: mm 1050 - Ejector stroke: mm 130 - Ejector force: 49 kN Injection unit - Screw diameter: mm 50 - Ls / D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: cm3 393 - Injection weight for PS: 357 g - Inject ...