Injection moulding mac KRAUSS MAFFEI KM 150-520 C2

machines for plastic / injection moulding machines

demand more photos

Exapro S.A.S
[ dealer profile ]

49400 Saumur
France

machinery dealer member since 2023

machine list (4977)

send inquiry

add to watchlist

send inquiry

item-No.: 164837630	Quantity: 1	Date: 09.11.2024
Year of manufacture: 2005	Location: Poland

Price:	19,000 EUR
Manufacturer:	KRAUSS MAFFEI
Model:	KM 150-520 C2
Type of machine:	Injection moulding mac
Description:	Injection moulding mac KRAUSS MAFFEI KM 150-520 C2 used machine Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 throttle on the valve outlet. Connection size ¼” - Door protecting the ejector chamber from the service side, with the possibility of opening - Mechanical standard joint according to Euromap 18 for handling device on fixed mold clamping plate (with console for KM max. 300 C) - Ejector force increased on entry/exit from 22 kN/10 kN to 40.0 kN/28.0 kN with reduced ejector speed. - Control of the rear position of the hydraulic ejector and the ejector plate in the mold - Chromed columns of the closing unit and the injection unit - Oil cooler with increased capacity for inlet water temperature up to 31°C at 4 - 6 bar inlet water pressure at the connection points - Adjustable stagnation pressure for hard PVC processing - Hydraulic 1-fold control of the core on the movable mold clamping plate on the opposite side of the service. Connection size ½” internal thread (speed and pressure adjustable on the monitor screen). Plug layout according to Euromap 13 (Han 16 A) - 4-fold rotameter without thermometers and without solenoid valves - Hydraulic pump motor with class F insulation - Potential-free signal for HAN 3 A dye dispenser. - The start of the pressure depends on the hydraulic pressure - Additional software for continuous logging of events (Logbuch) and viewing them by scrolling the screen backwards (max. 10,000 notes) in the range of: - changes of machine setting data; - alarm reports and acknowledgments; - enabling or disabling the control with date, time and current cycle, and registering a password (standard) or a magnetic card (Pos. 89.6711); can be entered using a printer (Pos. 89.972 or Pos. 89.9721). Additional possibility of statistical analysis on the monitor with graphical presentation of alarms in semi-automatic and automatic operation of the machine. - Quality control package: process control (cycles - actual values) by specifying the tolerance range, actual value indicator, actual value memory - with the possibility of printing - Cycle time analysis package: an indicator of individual times and total cycle time for the last current cycle and any selected cycle. Graphical presentation of successive cycles or individual times running in parallel. - Recording cycle parameters in DOS format: The actual values of each cycle are stored on a separate diskette in DOS. Data analysis on an external PC in a standard program, e.g. EXCEL - Standard E41161673 connector for connecting an alphanumeric keyboard AT type MF2 for free text input of additional production information on 3 sides of the screen. - TFT color monitor - Set of set and actual value curves for the following parameters: injection speed, injection pressure, pressure, stagnation pressure and number of screw revolutions - PV-regulation of the injection speed, clamping pressure, stagnation pressure and start of clamping pressure depending on the hydraulic pressure Equipment of the LR 100 robot: Robot LR 100 MANUFACTURER: KRAUSS - MAFFEI - Krauss-Maffei LR 100 linear robot load capacity 10 kg - (gripper + drives + parts) the side of storage opposite to the service axles: stroke from form (X axis) - 550 mm, servo motor vertical stroke (Y axis) with engine brake - 1200 mm, servo motor transverse stroke (Z axis) - 1500 mm, servo motor foldable axle (C axis for putting down) - 0-90°, pneumatic - torque Md = 30 Nm Position measurement with an encoder - Mechanical joint according to EUROMAP 18 - Robot cover - AC pneumatic axis consisting of: - C axis (rotation around the Z axis between the Y axis and the gripper) rotation 0 and 90 °, torque Md = 30 Nm - with A axis of rotation (rotation around the X axis between the Y axis and the gripper) 3 positions: 0 - 90° and 180° torque Md = 3 Nm. Delivery instead of pneumatic C axis, ZE R31.2501. seller offer No. resale P230831058
Seller-item-No.:	P230831058

Share this machine on Facebook: