Tube diameter 20 to 114.3 mm Sanding belt dimensions 150 x 2,000 mm Grinding angle 20 to 90° Sanding rollers 26.9 mm and 40 mm Machine can be operated either with two handwheels or levers 400 V / 4 KW bolted to pallet 3 spare sanding belts Weight 295 kg - good condition - little used -

ALMiG Variable 150 Screw Compressor The Variable series is designed in such a way that it can be operated extremely economically in any kW class due to its unique design concept and can thus be used in a variety of ways. These variable speed compressors are particularly suitable for use as alternating load compressors. Separation system - highest compressed air quality through proven multi-stage separation SCD motor - highly efficient drive motor, protection class IP 55, optimal efficiency up to 96% SCD direct drive - loss-free power transmission, maximum cost savings Air end - excellent efficiency over the entire control range Cooling unit - large area radiators for extremely low c ...

Machine Type: Pipe Notching Machine Manufacturer: ALMI Condition: very good Offer Type: Used Machine Specifications: Power: 5 sizes Ø 28 – 61 mm Drive type: el./mech. Propulsion: 2.2 kW Remark: Substructure Weight: 100 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

 ...

• more information

Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and  ...

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 93 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

plate thickness: 5,0 mm tube diameter: 27,9 - 61,0 mm motor: 400 Volt total power requirement: 2,2 kW weight of the machine ca.: 87 kg. The advantages at a glance: high productivity, low investment, simple and fast operation, several diameters immediately available and ideal for double corner connections. With the motor-driven pipe notcher AL1-2E you can cut pipes with the Outside diameter Ø 26.9 (3/4?) Ø 33.7 (1?) Ø 42.4 (1_¼ ) Ø 48.3 (1_1 / 2?) and 60.3 (2?) Notch. Furnishing: - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - Required instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALMiG Direct 160 Screw Compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class due to its unique design concept and can thus be used in a variety of ways. These fixed-speed compressors are particularly suitable for use as base-load compressors. Separation system - highest compressed air quality through proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. There are hardly any limits to communication about the possible connection to it.  Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Radiator unit - large  ...