ID3268 OJ TM11/14 year/Year of construction 2001 approx. 9200 hours/hours Piling device, carrier device SR35 T, Deutz engine (400 KW) overhauled 500 hours ago, with vibrator MRZV 925 VS, with VDW gearbox, optional MDBA 3200 (built in 2014) available Piling rig, carrier SR35 T, Deutz engine (400 KW) overhauled 500 hours ago, with vibrator MRZV 925 VS, with VDW gearbox, optional MDBA 3200 (model year 2014) available

Gear motor, electric motor, electric gear motor -Manufacturer: ABI, gear motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12kw -Shaft: Ø 20 x 20 mm -Protection class: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg ...

• more information

TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 8 m -Tuchel connector: 5 pin -Water cooled -Weight: 3.7 kg ...

• more information

TIG hose package, welding torch, manual welding torch, TIG torch -with: torch body -Length: 7.5 m -Tuchel connector: 5 pin -Water cooled -Weight: 3.5 kg ...

• more information

Flushing drill rig machine for placing Wells ( dewatering), , - Flushing drill mast, Space under the drill head , 9 meters, Maximum lifting height of the winch 10.2 meters, Total height (working position) 10.5 meters, Winch : 250 kg, Pull up 15Kn , pull down 5kn, Drill head : hollow drill head , right to left turn power 3000nm, , Crane : NEUSON , year 2000 , 8002 RDV, Powered by : YANMAR 4TNE98 NSR, fully documented, , = More information =, , Type of fuel: Diesel, Year of manufacture: 2008, GVW: 10.300 kg, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, ...

Fraste Flushing Drill, suitable for Geothermal drilling., - Machine is from construction year 1998, at an hourage of 50 hr ago a complete engine overhaul undergone (demonstrable with invoices) , - Equipped with manipulator, - 49x 4meter tube on the machine (196 meters total), - Good working, ready to use., -Pull up : 5000kg, -Pull down 3500kg, -Winch : 1000kg, , = More information =, , General information, Year of manufacture: Dec 1998, Model year: 1998, Colour: Blue, , Technical information, Power: 113 kW (154 HP), Number of cylinders: 4, Type of fuel: Diesel, GVW: 9.000 kg, , Condition, Technical condition: good, Visual appearance: good, Damages: none, , Additional information, Please cont ...

built 1984, 800 mm diameter, 1.400 mm cylindrical part, 570 mm cone height, 1 vacuum filter with bag charging hopper, filtering surface 2,3 m², 3 blow through cellular wheel sluices 150 mm x 150 mm for feeding a conveying system. ...

• more information

Controls: Heidenhain TNC 360 (1992) Table size: 1,000 x 1,000 mm Table size with extension: 1,345 x 1,000 mm Table load max.: 2,000 kg Distance between the s distance Spindle to table top: 0 - 1,100 mm Travel distances: X 1400 mm Y 900 mm Z 850 mm W 370 mm spindle holder: MK 5 spindle drive power: 6 kW spindle speeds: 30 - 1,500 rpm Drilling spindle diameter: 82 mm drill diameter: 2 - 70 mm Drilling tools Diameter: 17 - 450 mm Drilling capacity to full ST60: 45 mm Drilling capacity to full GG: 70 mm Zubehoer: drills; tools; usw. machine was rebuilt in 1992 and !; Very good

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3 ...

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)  ...

• more information