Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station  ...

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by s ...

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

Three Roll Calender Manufacturer: Reed 24inch wide x 12inch diam. Right angle drive Double helical gears Hand nips Lunn Safety Gear Holroyd Gearbox Crompton Parkinson Motor Complete with Starter  ...

• more information

FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.

Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

The mechanical press line consists of a total of 5 individual presses with mechanical transfer and 2 sliding tables per machine, which can be extended sideways. 1. Double Action Press Capacity: Inner Slide: 6000 kN Outer Slide: 4000 kN Cushions (2) (6 bar): 500 + 500 kN Stroke: Inner Slide: 812 mm Outer Slide: 685 mm Cushions: 355 mm Adjustability (motorized): Inner Slide: 381 mm Outer Slide: 381 mm Cushions: 25.4 - 355 mm Features: Cushions equipped with locking devices Performance: Cycles per minute (at 12 effective draw): 10 Operating Motor: 73.6 kW Dimensions: Inner Slide: 2286 x 1372 mm Inner Slide Adapter Plate (101.6 mm) ...

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,  ...

• more information