Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture m ...

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuc ...

Manufacturer: Flott Type: BC 40 Super Year of Make: 2005 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Travel Z-axis: 400 mm  ...

• more information

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spin ...

we sell 1 of 2 used tray / carton setup with an additional magazine for a package leaflet or e.g. Spoon that is placed in the box and glued to the bottom. The tray / carton erector has 2 Nordson hot glue devices (Pro Blue) each and is completely built in V2 A (also the control cabinet). The system is adjustable in terms of cardboard height and width as well as length, but are set to a currently fixed level. The systems are in a very good used condition as they were in stock after a factory closure (optical condition is almost as new). The special feature of the system is that a vision system (by KEYENCE) is installed in the system, which can check a correct insertion of the package leaflet o ...

Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable by hand lever 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed by head pressure Specifications: Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed at the push of a button Feed speeds: 0.1 - 0.16 - 0.25 mm/revo ...

serial number: 33320007 frequency: 50 Hz volt: 380 V ampere: 3,8 weight: 300 kg taper MK: 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !