Complete regranulating line For PE PP ABS PS PC PS Including scrap silo,, extraction auger and crammed feeding unit Barrel with screw diam.130 mm.35 L/D N.1 vacuum degassing pump Semi-automatic screen changeravailable with FULLY AUTOMATIC SCREENCHANGER on request Water ring pelletizer Centrifugal dryer Installed power 498 kw. about 323 kw used in work Average throughput rate 450-700 kg/h depending on material and feeding rate New in 2000 The line is offered checked for good conditions, installed power : 498

Complete regranulation plant OMP Prealpina Type:ES-130. Screw and cylinder were renewed in November 2021 A new groove bushing as a spare part Simple degassing with vacuum pump DC drive used for PE/PP. Throughput at PE approx. 500-600kg. at PP.450-500.kg. per.h. Consisting of foil silo with agitator and discharge screw. Regrind/granulate dosing screw. Masterbatch dosing screw Tamping plant Extruder 130 L/D Hot tee granulator( also water ring granulator) Centrifuge Classifying sieve Removal with pressure blower. Plant is tested and stored (immediately ready for use)

BUFFER SILO, pre-extrusion, to feed 350 kg/h extruder (105 mm. screw), about 5.000 lt.capacity, flat bottom for film scraps, offered AS IS or RECONDITIONED ...

• more information

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw ca 380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents, fitted with a 85 mm Ø screw 35 L/D NEW SCREW+BARREL+FEEDING PIECE, vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet NEW, CE compliance, User’s manuals, Electrical drawings, AVAILABILITY: about 10 weeks from confirmation, CAPACITY: 240-320 kg/h, INSTALLED POWER: 104 kw

EXTRUSION LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger y.2020, water ring pelletizer, drying centrifuge, vibro classifier, Bought in 2020, Still connected and working with PE., Ready-to-go, ---------------------------------------------------------------------- ----, (Possible addition of complete Mcguire feeding structure n.4 gravimetrical dosing units - new 2020 - original cost 100K€, bid your price if you need it), THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP ...

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., CAPACITY: 300-430 kg/h nominal

PREALPINA EXTRUDER, For PE PP ABS PS PC PS, Average throughput rate 450-600 kg/h depending on material and feeding rate, 280 kw. a.c. drive, Electric cabinet with touch screen panel, Scrap silo available on request, if needed, with extraction screw, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, non-stop screen changer available with FULLY AUTOMATIC SCREENCHANGER on request, Water ring pelletizer, Centrifugal dryer, vibro classifier, On separate offer: vertical mixers for scraps and granulate,etc., running and connected, Available 02.25

CMD PREALPINA EXTRUSION LINE for PE PP PS PC ABS, 130 mm screw - 500-600 kg/h, including:, scrap silo, feeding auger, crammed feeder, extruder with 130 mm screw 35 L/D (new 2019), MISSING OF screenchanger (can be supplied separately), control panel, water ring pelletizer, Electric cabinet for complete management of the line, The line can be partially or totally reconditioned with addition of screenchanger, new screw+barrel+feeding piece, pelletizer, etc. on sepate request

PREALPINA EXTRUDER AS NEW, For PE PP ABS PS PC PS, Average throughput rate 450-600 kg/h depending on material and feeding rate, 280 kw. a.c. drive, Electric cabinet with touch screen panel, Scrap silo available on request, if needed, with extraction screw, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Semi-automatic screen changer available with FULLY AUTOMATIC SCREENCHANGER on request, Water ring pelletizer, Centrifugal dryer, On separate offer: cyclon, vibro-classifier-vertical mixers for scraps and granulate,etc., Immediately available

PREALPINA 105 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, 132 kw main drive, Throughput rate 400 kg/h +/- 10% depending on scraps and feeding rate, The line includes:, crammed feeder, extruder with bi-metallic barrel, stellited 105 mm screw 35 L/D, anti-wear feeding piece, N.1 vacuum degassing system 3 kw, with water cooling system, semi-automatic screen-changer 190 mm Ø, water ring pelletizing unit, drying centrifuge, heat exchanging group, closed circle., to be connected to a central chilling unit (quotable on request), vibro-classifier, electric cabinets for managing the line with touch screen panel, Users manuals, drawings, CE., Available in 15 weeks from confirmation, Available with  ...