Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA  ...

Offer 23476 Specifications: - Max. working width 1020 mm - max. material thickness 3.0 mm - Cutting angle 2.7° - electr. Footswitch - Single stroke – continuous stroke can be pre-selected - Manual backgauge up to 500 mm - Front pull-out sheet metal support - Drive 400 V / 2.5 kW - Space requirement approx. W 1450 x H 1200 x D 1400 mm - Weight approx. 900 kg

Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg

sheet width: 1530 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,840 t dimensions of the machine ca.: 1,90 x 1,30 x 1,20 m - manual back gauge 500mm - Hold-down device with hard rubber strip - Sheet metal holding device mechanically controlled to the rear including sheet metal slide - Rear area protection via light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1530 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2,10 x 1,85 x 1,20 m - controlled back gauge 750 mm - Continuous hold-down device with hard rubber strip - pneumatic sheet holding device - Rear area protection in accordance with the UVV safety package - POS 100 control - Extended, extendable support table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,720 t dimensions of the machine ca.: 1,40 x 1,50 x 1,30 m • Manual back stop • Operating instructions • Cutting edge lighting • Continuous hold-down device with hard rubber strip • Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, ...

CNC Swivel Bending Machine 3000 x 2.5 mm with backgauge CNC POS 500 (3 axes) Accessories: wide rail for bending beam  ...

• more information

General SKUR0088 LocationBarneveld MakeSchröder & Co Machinenfabrik No.33-177 Year of constructionunknown Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition --  ...