| Description: |
Single sided edge banding machine COMPACT PC-6 IMA COMPACT PC-6220 F
used machine
Single sided edge banding machine
Brand: IMA
Type: COMPACT PC-6220 F
Year: 2000
Left hand machine
Workpiece transport via a driven transport chain and adjustable top
pressure
Beckhoff control
Need of space LxWxH mm: 7400x1500x2000mm
Weight: approx. 3600kg
Technical data:
Edge material:
a) Veneer/coil and strip ware,
b) PVC/coil and strip ware
c) Solid wood strips
min. edge height = approx. 14 mm
max. edge height = approx. 55 mm
min. edge tickness = approx. 0,4 mm
max. edge thickness = approx. 20 mm
min. panel thickness = approx. 10 mm
min. panel thickness = approx. 16 mm at use of the multi function
unit
max. panel thickness = approx. 50 mm
min. panel width = appprox . 60 mm
min. panel length = approx. 150 mm
max. strips = approx. 20x50 mm
Panel supernatant from the chain conveyor = approx. 35 mm
Pneumatic connection: approx. 7 - 8 bar
The basic machine of the IMA-COMPACT-PC consisting of:
- Drive for the workpiece transport via mechanical controllable gear
motor, feed speed approx. 8-20 m/min. (not the same as the working
speed)
- Conveyor chain (80 mm wide + 60 mm long chain plates)
- Top pressure equipped with: 2 rows of rubber coated rollers, height
adjustment (approx. 50 mm) central via handwheel
- IMATRONIC 121 SPS control with central unit and control panel; brand
Beckhoff
- Movable supporting rail approx. 700 mm for wide workpieces
Adjustment via NC axis: horizontal adjustable, unheated infeed fence,
pressure zone, flush milling, multi function unit, profile scraper
Pre-milling unit with 2 motors á 3 kW, 400 V, 200 Hz, 12000 rpm,
working flow in working and counter working direction, with blowing
nozzle for the removal of loose particles from the workpiece surface
and IR-heater.
Gluing unit with closed oil-bath gear, temperature control with
separate glue roller drive and 1 main pressure roller
5 re-pressure rollers with mech. digital display, pressure rollers
single seitlich sprung and adjustbale on side.
Hot melt application 0,8 l compl. with heating cartridge and suplly
plug max. edge height 50 mm
Single roller/strip magazine, feeding angle 8° for coil material up
to 3 mm and strips up to 20 mm, end cutter pneumatic controlled, up to
3 mm edge thickness, max. edge cross sectional area 120 qmm, incl.
restraint device for the coil ware, max. coilØ 860mm
End trimming unit
2 motors á 660 W, 400 V, 200 Hz., 12000 rpm, installed on top
pressure for the end trimming of the frontal and rear edge or strip
supernatant, for flush or chamfer cuts
Milling unit for flush milling from top and bottom, W41214335 for 2
motors á 1850 W, 400 V, 200 Hz, 12000 rpm
max. approx. 3 degrees swivable (at workpiece thickness over 25 mm),
with height tracing, without side tracing, motors ordered one above
the other,
Multi function unit for fine milling or profile milling of the upper
length edge as well as the frontal and rear edge,
with height and side tracing, pneumatical feed movement horizontal and
verticale.
with 1 motor 660 W, 400 V, 200 Hz, 12000 rpm, with quick change,
Profile scraping unit
Chip collecting box for profile scraping unit
Self tracing scraping unit
Chamfer sanding/buffing unit
horizontal controllable, for cleaning the upper and lower flush milled
edge materials or for the polishing of thick PP-/PVC-edges
Smoothing unit
to smooth the milled and scraped PVC/ABS-profile edge, for R=1,3-4
with 1 upper and 1 lower smoothing zone, with horizontal, pneumatical
moving device, min. workpiece thickness 16 mm
Note:
The specifications and descriptions are a copy of the order
confirmation at that time. Datas are for information and are not
binding.
seller offer No. resale 0030411
|