Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

1992 Illig RDM 37/10 -Thermoforming machine used in a extrusion line: Built in 1992 Fully functional and modified cup machine with special equipment - hollow bottom device for PS. The deep drawing machine can be inspected on site. The operating instructions and spare parts lists are available in German. The system and tools can be inspected on site by appointment. Technical data: Rated power, kW: 11.3 Moulding area, mm: 475 x 250 max. film width, mm: 495 min. film width, mm: 150 max. feed length, mm: 280 min. feed length, mm: 50 max. drawing depth/negative, mm: 100 max. number of cycles/min: 48 Consumption air/cycle at 6 bar: 100 Nl (net tensioned air) Heat energy to be diss ...

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Counter age 2006, with Hole Punch Station, Thermoformer age 1998, refurbished in 2019 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs, Consisting of:, ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New origin ...

ONE ILLIG Thermoforming machine mod. RDM 63/10 For the production of EPS/PS - PVC - PP - PET and similar containers. Technical features: - Max. molding surface: 850 x 310 mm. - Max. feed length: 280 mm. - Max. sheet width: 870 x 310 mm. - Max. mold clamping force: 6 ton.65. - Max. molding depth: 140 mm. - Heating body. - Molding and die-cutting body. - Cycles s/material: 25 cycles/min (average). - Material thickness: up to 2.3 mm. - Heating zones: 4 + heating chains. - Max. coil diameter: 1.200 mm. - Upper heating consumption: 11,5 kW. - Lower heating consumption: 8,9 kW. - Mold clamping force max.: 6 ton.65 - Max. mold depth: 120 mm. EXCULPTING MOULDS FOR R-63/10 (bi ...

Thermoforming - ILLIG 37/10 RDM automatic roll forming machine Automatic thermoforming machine with the following technical data: ILLIG 37/10 RDM brand, FORMING AREA 475 X 250 mm, forming depth 100 mm, maximum film width 495 mm, maximum film roll diameter 1200 mm Use material: PS, PP, PVC; We sell a two nest mould for mushroom casseroles mounted on the machine.You can inspect it in work!