We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower
PS and PP THERMOFORMING SYSTEM (THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) Manufacturer / Origin: ILLIG (D) & KUHNE (D) & COLOTRONIC AG (CH) Max. film width 700-800 mm Equipment / Additional information: Thermoforming system is constructed as follows: - COLOTRONIC dosing unit CSK30 with 4 components // Age: 1999 - KUHNE Extruder KF70E & // Age: 1999 - KUHNE Co. Extruder K45-24D // Age: 1999 - KUHNE smooth and cooling rolls (calendering) / smoothing unit: GA4/900; puller: BA2-1/900 // Age: 1999 - Wide slot nozzle // Max. film width 700-800 mm // Age: 1999 - ILLIG thermoforming machine RDM K 50 // Age: 1999 M. No.: 322 // Counter: 801 ...
Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included
M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.
Due to a clearance sale this Machine is on Sale at a CLEARANCE Price Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP
PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts ...
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder
Illig RDM 50K - 1994 thermoforming machine Year of construction 1994 Availability: immediately The line is in good condition Key data Suitable for processing both PS and PP In good running condition Machine is still in production Live test possible Availability : immediately Specifications Forming area 500 x 280 mm Max material width 525 mm 200 mm air cylinder for per stretcher Servo driven main engine and material transport 7 upper heating zones 7 lower heating zones Tool temperature control Separate down holder cooling Material sag control Additional equipment Foil unwinding station Endless stacking unit Find more here - / Contact us at -
1992 Illig RDM 37/10 -Thermoforming machine used in a extrusion line: Built in 1992 Fully functional and modified cup machine with special equipment - hollow bottom device for PS. The deep drawing machine can be inspected on site. The operating instructions and spare parts lists are available in German. The system and tools can be inspected on site by appointment. Technical data: Rated power, kW: 11.3 Moulding area, mm: 475 x 250 max. film width, mm: 495 min. film width, mm: 150 max. feed length, mm: 280 min. feed length, mm: 50 max. drawing depth/negative, mm: 100 max. number of cycles/min: 48 Consumption air/cycle at 6 bar: 100 Nl (net tensioned air) Heat energy to be diss ...