Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel  ...

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 5100 mm Main spindle:: turning speed range - main spindle: 7,1 - 710 min/-1 max. Torque: 8500 Nm no. of turning speeds: 21 spindle diameter: 95 mm spindle diameter in front bearing: 160 mm spindle motor: 17 kW total power requirement: - kW weight of the machine ca.: 8,0 t dimensions of the machine ca.: 7,0 x 3,0 x 2,0 m - DRO - 2 Steadies - Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 940 mm Turning length: 3000 mm Turret positions: 8 CNC Brand: Siemens MACH-id     4027 MAKE         Poreba TYPE           TRP 93 MN YEAR          2003 SPECIFICATIONS Swing over bed Ø   940 mm Control     Siemens Swing over cross slide     570 mm Distance between centres      3000 mm Work piece weight         9200 kg Spindle bore      254 mm Spindle speeds / ranges         500 Rpm Bed width         585 mm Power ...

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id     3990 MAKE         Poreba Poland TYPE           TCG 160 YEAR         1995 SPECIFICATIONS Swing over bed Ø      1600 mm Swing over cross slide       1300 mm Distance between centres    10.000 mm Work piece weight       40.000 kg Spindle speeds / ranges        200 Rpm Bed width      1300 mm Power        75 Kw ...

Acurite digital readout 2 axis, note scales are not availebel and included, steady rest is included 3 x units as seen on pictures and the 4 chuck 800 mm is included. ...

• more information

Center height: 930 mm Center distance: 3000 mm Spindle bore: 95 mm Centre lathe POREBA - TPK 90 A1 / 3  2 axis digital readout 3 chuck 630 mm 4 chuck 800 mm Rapid feed all directions 3 x Steady rest DBC Turning Length:      3000mm Swing over bed Ø:        930mm Swing over cross slide Ø:620mm Spindle bore:            95mm Spindle power:           22kW Bed width:               585mm Tailstock spindle Ø:     6Ø Stroke pinole:           200mm Spindle taper:          ...

Center height: 930 mm Center distance: 12000 mm Spindle bore: 95 mm LathePOREBA - TPK 90 A1 / 12 Universal lathe 930 x 12.000 mmMACH-ID 8611 Make: POREBA Type: TPK 90 A1 / 12 Year: 1992 Accurite digital read out system 2 axis 2x Steady rest 50 - 300 mm 2x Steady rest 200 - 500 mm Feeds all directions 4 chuck 800 mm DBC Turning Length:      12000mm Swing over bed Ø:        930mm Swing over cross slide Ø:620mm Spindle bore:            95mm Bed width:               585mm Stroke pinole:           300mm Spindle taper:      &nb ...

Lathe POREBA TR115 B2 x 12000 mm - Year of construction 1986 - -Distance and turning length: 12 meters - max. turning diameter above the bed: 1150 mm, - Max. turning diameter above the support: 850 mm, - max. turning diameter after removing the bridge: 1480 mm, - Spindle passage: 120 mm, - Spindle speed range 5: 500 rpm - Fast longitudinal feed: 4000 mm/min - Fast transverse feed: 2000 mm/min The machine is still in operation at its original location. It can be visited and tested. If you are interested, I will send you more information and photos.

Center height: 800 mm Center distance: 6000 mm Spindle bore: 105 mm CNC lathePOREBA - TCG 160 - 6000 MACH-ID 8793 Make: POREBA Type: TCG 160 - 6000 Control: Hedienhain Manuel plus 620 Year: 1991 Show price Request quotation 4 chuck 1600 mm Motorized tailstock Steady rest Ø 800 / 500 mm New Heidenhain Manuel plus 620 CNC in 2014 New E-Cabinet in 2014 New measuring scales in 2014 Swing over bed Ø:        1600mm Swing over cross slide Ø:1300mm DBC Turning Length:      6000mm Spindle bore:            105mm Spindle power:           75kW Bed width:         ...

Center height: 800 mm Center distance: 8000 mm Spindle bore: 105 mm Centre lathe POREBA - TCC160  Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support DBC Turning Length:      8000mm Swing over bed Ø:        1600mm Swing over cross slide Ø:1250mm Spindle bore:            105mm Spindle power:           55kW Bed width:               1100mm Tailstock spindle Ø:    &n ...