Spray painting cabins HOLZMECH Spreymak

wood working machines / lacquer machines / Spray painting cabins

SC Teovani SRL
[ dealer profile ]

Mr Razvan Dominteanu
60731 Bacau
Romania

004074460... phone

machinery dealer member since 2024

machine list (20)

send inquiry

add to watchlist

send inquiry

item-No.: 164321984	Quantity: 1	Date: 18.06.2024
Year of manufacture: 2024 new machine	Location: Romania 60731 Bacau

Price:	22,000 EUR
Manufacturer:	HOLZMECH
Model:	Spreymak
Type of machine:	Spray painting cabins
Description:	Spray painting cabins HOLZMECH Spreymak new machine Abmessungen on demand. POSITIVE PRESSURE DRY SHOT CABINET WITH PAPER FILTER 44 - cabin height 3 m - heating system hot water serpentine heated - positive pressure 4,5 KW motor 18.000 m3 Taking filtered fresh air from outside and providing flow inside the cabin - With the cellular fan, it allows harmful gases formed in the cabin to escape - exhaust fan 15000 m3 It throws out the paint particles passing through the filter - dust filter system All input and output are filtered. - lighting – watertight lamps 4 Pieces, no arc can be made without stratel - ventilation grilles guidance can be made - gas intake vents adjustable in 2 directions - 4 cm insulated polyurethane facade panel - Automatic sliding door 1 pce width 2 mt and height 2.70 mt - Side suction filtered grilles - Suction system paper filter 33 - Electrical distribution panel 1 pce - DRY DISCHARGE ROOM WORKING PRINCIPLE Air taken from the external environment with the Positive Pressure Fan; In cold weather, it is heated in the air preparation unit. Then, the air at optimum temperature is separated from dust and pollen in EU 4 ceiling filters and released into the indoor environment. Paint particles move towards the suction direction with the air. Air is thrown out with exhaust fans. Thus, it ensures that solvent gas, which is harmful to health, is discharged outside the paint booth. With the flow rate difference between the Positive Pressure Fan and Exhaust Fans, positive pressure is created in the cabin and the filtered air is kept inside. Therefore, dust etc. can come in from the outside environment (doors). substances are prevented from entering. The air flow in the empty room will be 12m/sec. POSITIVE PRESSURE DRY DISCHARGE CABINET WITH PAPER FILTER 84 - cabin interior height 3m - heating system with hot water heating option - positive pressure with clean air channels filtered from outside - Cellular fan provides warm air blowing and dirty air removal - exhaust fan ensures that harmful gases accumulated in the cabin escape to the outside - dust filter system easy to change filter system cost is cheap - lighting – watertight lamps, non-arcing fixtures without starters - ventilation grilles can be adjusted in all directions - gas suction vents allow the gases accumulated in the corners to be removed - 4 cm insulated polyurethane facade panel with special snap locking - Automatic sliding doors, double-winged, dust-free, 2 pieces - - All navigable machines above the cabin are mounted here. - - Energy cost of the cabin is 8.5KW DRY DISCHARGE ROOM WORKING PRINCIPLE The flash off phase is the time period during which the solvent evaporates between two dyeings or between the last application and the oven circuit. This time is absolutely necessary to ensure that the evaporated solvent gases on the painted surface are expelled. Following the hashing phase, drying and resting in the same cabin is carried out. In this phase, the drying time is a highly variable phase that may or may not be S4748684 necessary depending on the type of paint and the application method used. In both cases, the time setting is determined by the painter or paint supplier. When the doors are closed and the START button is pressed, the aspiration system circulation pressure fans operate. The circulation fan heats the air it absorbs from the drying cabin and pushes it back in through the ceiling filters, creating the air flow inside the cabin and providing the most ideal wood-based paint drying. Solvent vapor accumulation inside the cabin, which can reach flammability and explosion levels, is prevented. To eliminate the possibility, gas vapor is thrown out of the factory for the second time with the waste gas fan. • Ceiling – Wall Material (Insulation): Sandwich panel (40 mm) • Heating system: Hot water coil • Ventilation unit: Cell fan with 6-point vent • Air handling unit fan section • Fan type: 12 x 12 • Air flow rate: 8000 m³/h (manufacturing option depending on the m3 of the cabin) • Total pressure: 58 mm/sec • Electric motor: 3hp 1450 rpm • Sliding automatic controlled doors (double wings) • Length: 225 cm Width: 200 cm • ● Harmful gas removal unit is available Price from 22.000 EUR depending on the dimmensions of the cabin seller offer No. resale 164321984

Share this machine on Facebook: