...

• more information

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tail ...

Center height: 500 mm Center distance: 1500 mm Spindle bore: 105 mm MACH-id   3541 MERK  KNUTH Germany TYPE  DL 550 / 1500 B YEAR  2008 SPECIFICATIES Draai Ø diameter over bed   1100 mm Draaidiameter over support  790 mm Draai Ø diameter in de zak   1270 mm Draai lengte  1500 mm Doorlaat - spindel boring  105 mm Toeren - Snelheden - Stappen  6 - 800 Rpm Bed Breedte   550 mm Vermogen Kw  11 Kw AFMETINGEN Lengte   3510 mm Breedte  1590 mm Hoogte   1760 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never u ...

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Knuth, double bench grinder type DSB200D -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 2950 rpm -Operating voltage: 220/380 volts -Dimensions: 500/300/H1100 mm -Weight: 43 kg ...

• more information

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm  ...

• more information

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETI ...

KNUTH MF5V Universal Milling Machine YOM 2005 Germany X-travel 800 mm Y-travel 390 mm Z-travel 380 mm Spindle taper ISO SK 40 Speed 70 - 3600 rpm Quill feed 3 steps- 0,04/ 0,08/ 0,15 mm/r Quill travel 127 mm Distance spindle nose- table min./max. 50 / 456 mm Distance spindle center to column min./max. 57 / 603 mm Table dimensions 1370 x 250 mm Table load 350 kg Total power requirement 3,75 kW Machine weight approx. 1590 kg dimension machine approx.LxWxH 2,1 x 3,1 x 2,3 m Accessories: Vices, 3 tool holders

Specifications: - 2 mot. driven rollers - manual. Delivery of the top roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 132 mm - Bending performance - Flat steel upright 50 x 10 mm - flat 80 x 15 mm - Square 30 mm - Square tube 50 x 50 mm - Round tube 60 x 1.5 mm - Drive 400 V / 0.6 / 0.8 kW - with: - right / left - run - Standard bending set for flat and angle material - separate control panel - Weight approx. 200 kg - Space requirement approx. W 650 x H 1300 x D 950 mm