Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tail ...

Offer 24369 Specifications: - Max. turning diameter 400 mm - Max. turning diameter via support 225 mm - Max. turning diameter over bridge 520 mm - Bridge length 320 mm - Center width 1500 mm - Spindle mount Camlock D 1-6" - Spindle bore 65 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 22 - 1800 rpm - Feeds longitudinal + transverse - Rapid traverses longitudinal / transverse - Travel of the cross slide 330 mm - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread - Drive 400 V / 5.5 kW - with: - chip tray, 3 + 4 jaw chuck, steady rest, steel holder - Coolant device ...

Combined drilling and milling machine make KNUTH type VBF 40Machine -No: 604046Technical specifications:Drilling capacity in steel: 38 mmTapping: 25 mmEnd milling up to: 25 mmCutter heads up to: 75 mmSpindle mount: MK 4Throat: 300 mm16 spindle speeds: 120 - 1600 rpm.Quill stroke: 120 mm3 automatic feeds: 0.15 / 0.23 / 0.3 mm / revTable size: 850 x 250 mmmax.distance spindle / table: 450 mmX x Y x Z: 470 x 270 x 460 mmDrive power: 2.2 kWWeight approx: 750 kgExternal dimensions: 1150 x 1070 x 2000 mmWith- Work table with attached air table 1200 x 1200 mm- stepless speedsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by  ...

Description: Vertical head is tiltable on both sides (±90°) Drilling capacity: Steel 30 mm Milling diameter in steel (max.): 25 mm Thread cutting capacity: Steel M 16 Boring capacity: 100 mm Working range: Travel X-axis 600 mm Travel Y-axis 270 mm Travel Z-axis 300 mm Table clamping surface 1120x280 mm Vertical milling head: Spindle speed (vertical): 115 - 1750 rpm Spindle mount (vertical) SK 40 Quill stroke: 120 mm Distance spindle center - column 160 - 610 mm Distance spindle nose - table surface 90 - 400 mm Horizontal milling head: Spindle speed (horizontal): 40 - 1300 rpm Distance horizontal spindle - table surface 0 - 300 mm Approx. Onsite Dimension. (l x w x h): 1 ...

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

Capacity round maximum diameter: 810 mm Angle degrees maximum: 480 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm MACH-id   3542 MERK  Knuth Germany TYPE  HB 810 L YEAR   2008 SPECIFICATIES  Circel / Band zaagVol / Half automaat  Bandsaw Verstek zagen links en rechts ˚Graden  ANgle cutting 45 Gr .Capaciteit bij 90 ˚ Graden rond Ø  810 mm Capaciteit bij 90 ˚ Graden plat  810 x 850 mm Capaciteit bij 45 ˚ Graden rond Ø  810 mm Capaciteit bij 45 ˚ Graden plat  480 x 850 mm Zaag blad / band afmeting  8200 x 41 x 1,3 mm Zaag snelheid M/Min. 20 - 100 M/min AFMETI ...

3-way row drilling machine make KNUTH type KGB 25Year of construction 1996Technical specifications:max.drilling capacity in steel: 25 mmTapping capacity: M 16Spindle mount: MK 3Quill stroke: 150 mm3 spindle speeds: 100 - 2900 rpm.Projection: 225 mmDistance spindle - table: 15 - 470 mmTable L x W: 1300 x 295 mmDrive power: 0.75 kW / 380 VDimensions approx .: 1600 x 800 x 1900 mmWeight approx: 750 kgwith- 3 drill headsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm  ...

• more information

CNC Milling Machine Fabr. KNUTH Type WF 1 CNCYear 1995Table mounting surface: 270 x 700 mmTable movement along X: 300 mmTable movement vertical Y: 200 mmTable movement across Z: 350 mmSpindle mount horizontal and vertical: ISO 408 spindle speeds horizontally: 110 - 1230 rpm.8 spindle speeds vertical: 150 - 1660 rpm.8 feeds: 26 - 290 mm / minRapid traverse: 1100 mm / minPinole way: 60 mmDrive power: 3.7 kWDimensions approx: 1310 x 1380 x 1650 mmWeight approx: 1000 kgWith- CNC track control type Commander- rigid angle table- Vice- Various tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technica ...

Universal tool milling machine make KNUTH type WF 5Machine -No: 108788 Year 1996Travel X: 400 mmTravel Y: 320 mmTravel distance Z: 440 mm18 spindle speeds: 63 - 3150 rpm.Spindle mount: ISA 40Projection: 165 - 485 mmTable size: 800 x 320 mmFeeds stepless: 10 - 1000 mm / min.Rapid traverse: 2000 mm / minDrive power: 3.0 kWDimensions approx: 1700 x 1660 x 1890 mmWith- 3-axis digital display- rigid angle table- Vice- many tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your quer ...