: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software s ...

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was cr ...

Inv. Num. : 7366 Type: Hydracrop 70- SD Producer: GEKA Created: 1993 Parameters: Power consumption: 9 kW Impact neck: 500 mm Machine weight: 2400 kg Dimension: 1300 x 2100 x 1800 mm Equipment: 2 foot pedals  ...

• more information

Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of construction approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-edge shears 45 x 45 mm Round material shears 45 mm Rectangular clinker up to 12 mm Motor power 5.5 kW Mains connection 400 volts, 50 Hz stop with el. Stroke release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular clinker 550 x 400 mm - Working height rectangular clinker 930 mm - approx. 21 pieces of different punc ...

This GEKA Hydracrop 80A sheet metal machine was manufactured in 2010. It features a punching force of 80 tons and can handle materials up to 14 mm thick. The machine includes shears for flat, angle, square, and round materials, enhancing its versatility. Ideal for operations requiring precision in sheet metal work. Contact us for more information about this machine.

GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - numbe ...

GEKA Hydracrop 70-SD Punching machine  ...

• more information

IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.

puncher: 50.0 t square edge steel: 40.0 x 40.0 mm round bar steel: 40.0 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 28.0 x 13.0 mm shear: flat material: 300 x 15 / 200 x 20 mm throat: 250 mm work stroke: 60.0 mm work height max.: 1085 mm total power requirement: 4.0 kW weight: 1320 kg range L-W-H: 1600 x 800 x 1680 mm current new price approx. 19.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripp ...

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 110 to : 4-30 mm punching unit with hydraulic stripper hydraulic material clamps X- und Y- axis on ballscrews,each with servo motor CNC control Omron Flash memory Touchscreen OPTIONAL EQUIPMENT: TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,- central punch: 100 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/20 mm lateral punches 75 % of punching force max. Dm. 31 mm max. thickness 20 mm max. Dm./thickness 31/18 mm TRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,- central punch: 100 % of punching force max. Dm. 40 mm max. thickness 20 mm max. Dm./thickness 40/20 mm lateral punches 60 % of punching force max. Dm. 31 mm ma ...