An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. ...

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160  ...

• more information

7x 50meter 120mm2 = A9SWA4120 = € 3.000,- per 50 meter, 12x 50 meter 95mm2 = A9SWA495 = € 2.350,- per 50 meter, 2x 50 meter 25mm2 = A9SWA425 = € 650,- per 50 meter, 2x 60 meter 16mm2 = A9SWA416 = € 400,- per 50 meter; Accessories: 7x 50meter 120mm2 = A9SWA4120 = € 3.000, - per 50 meter, 12x 50 meter 95mm2 = A9SWA495 = € 2.350, - per 50 meter, 2x 50 meter 25mm2 = A9SWA425 = € 650, - per 50 meter, 2x 60 meter 16mm2 = A9SWA416 = € 400, - per 50 meter

Technische Daten: - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm - Min. Center Distance Between Holes 220(L)mm x 32(W) mm - [...] length 2440 mm - [...] length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi) - Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm

WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor

 ...

• more information

M. No.: 13-6-193497 // Ser.No. : 985286 // Power : 3000 – 10`000 B / h Format (cm): A3+ Equipment / Additional information: Printing area: 297 mm x 420 mm Sheet sizes: min. 55 x 75 mm max. 315 x 445 mm Paper weights: 30 - 400 g / m2 Gripper edge: 8mm Sheet feed system: Suction feeder Paper delivery system: chain delivery including powder applicator and air shower Ink rollers: 2 applicator rollers 11 distributor rollers Dampening unit: Integrated inking / dampening system Electric connection: 220 V, 50 Hz, 16 A

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg  ...

• more information

Type: MULTI DEPOSITOR Built: 2016 function-tested and cleaned Dosage by compressed air pump 4x Pcs. Available  ...

• more information