Center width 1500 mm Control Heidenhain Manuall-Plus Multifix Size C 8-fold disc turret Fabr. Sauter  ...

• more information

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2002 Spindle bore: 70 mm Center width: 1000 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 10 VDI 30 tool holders 2 pcs of VDI 30 powered tools Coolant Setup 3 jaw chuck SCHUNK 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Chip tray Operating instructions

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2005 Spindle bore: 70 mm Center width: 1000 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter revolver VDI 30 with driven tools 10 VDI 30 tool holders 2 pcs of VDI 30 powered tools Coolant Setup 3 Jaw chuck SCHUNK ROTA 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Chip tray Operating instructions

Description: Turning diameter over bed: 500 mm Turning diameter over slide: 290 mm Face travel: 260 mm Center distance: 1000 mm Control: Heidenhain Manual Plus Speed range: 8 - 3000 rpm Drive power main spindle: 12 kW Max. Torque: 920 Nm Gear stages: 2 Gear stage 1: 8 - 750 rpm Gear stage 2: 32 - 3,000 rpm Spindle head: 8 / DIN 55027 Spindle bore: 70 mm Spindle diameter in front bearing: 120 mm Spindle nose: ME 80 Chuck diameter: 250 mm Tool holder: Multi-Fix C Quill diameter: 80 mm Quill stroke: 180 mm Quill holder: MK 5 Rapid traverse X: 8 m/min Rapid traverse Z: 10 m/min VC X: max. 5,000 mm/min VC Z: max. 5,000 mm/min Total power requirement: 24 kVA Attention: Jaw chuck is not included i ...

Gildemeister NEF 520 Cycle Lathe, Year of manufacture 2004, Control Heidenhain Manual Plus 4110, Travel X/Z 260/1000 mm, Revolver 8-speed, VDI 30, Spindle speed up to 3050 rpm, Tailstock Quill stroke 180 mm, Conveyor Spindle passage up to 70 mm, coolant device,  ...

• more information

Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of Make: 2003 Spindle bore: 70 mm Center width: 1500 mm Circumference Ø over bed : 500 mm Circulation Ø over face slide: 290 mm Tip height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting MULTIFIX tool holder with 10 inserts 3 jaw chuck FORKARDT 0 250 mm ICP Contour Programming Tailstock with extendable drill quill Conveyor Coolant Setup Operating instructions

The machine runs but It has only one problem with the PLC(Program to control). Manuel runs it well. "Connection to the CPU cannot be established" the machine has 47174.4 hours of operation. Find more here - / ...

• more information

turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock  ...

• more information

approx. 20000 hours Find more here - / Contact us at -  ...

• more information