Accessories available Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm  ...

• more information

Parallel Lathe WEILER PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with 1 4-jaws chuck Ø 155 mm 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face p ...

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Accessories: -Three-jaw Chuck -Steel holder multi fix A -Lamp -Coolant Technical data: Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm  ...

• more information

 ...

• more information

turning diameter:160 mm turning length:500 mm weight of the machine ca.:4 t This machine comes from a training workshop. Technically, the machine is fully functional and in a well-maintained condition.  ...

• more information

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

1990 WEILER Primus 2 The machine data is as follows: - Model: Weiler Primus 2 - Year of construction: approx. 1990s - Condition: used - Travel x: 250mm - Travel z: 55mm - Max. turning length chuck: 500mm - Max. turning length between centers: 500mm - Feeds: 8-2999mm/min - Eilgänge: 12m/min (z), 7,5m/min (x) - Feed force: 7000N - Spindle passage: 42mm - Tool turret (VDI 30) with 12 places - Tailstock with quill MK3 (max. supporting force 5000N) - Dimensions: 2587 x 1750 x 1800 mm - Weight: approx. 4000kg - Motor power: 19Kw Defects of the Weiler CNC machine: - No powered tools - Poor switch-on procedure (approx. 1 hour) - Without tools and clamping devices The machine has been carefully ...

turning diameter over bed: 250 mm turning diameter over slide rest: 180 mm turning length: 450 mm total power requirement: 1,5 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 1,2 x 0,8 x 1,5 m No. 3629 Lead and feed spindle lathe WEILER Primus LZG Working range: Center height 125 x 400/500 Drive: 1.5 kW Three-jaw chuck Ø 130 mm Various collets Driving disk Multifix A steel holder head and 2 holders documentation Spindle bore 24 mm Ø Tailstock taper MK 2 Speed range: 60 - 3000 min-1 Dimensions: approx. 1.20 x 0.80 x 1.50 m Weight approx. 550 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.