Technical data Max. work piece diameter: 15 mm Turning length: 70 mm Spindle hole: 15 mm Max. treading diameter: 8 M (Metric) Production capacity: 28 - 2100 pce/h Spindle speeds: Number of spindle speeds: 12 from: 900 rpm up to: 6500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Pick-up attachment Gripper device Vertical support Bar loader number of bars: TRAUB Type: B3000 Length of bars max.: 3200 mm Slotting attachment Drilling tailstock Workpiece counter Protective cover

CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 ...

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

Attention: Axle amplifier X3 axle defective and CPU bar loader missing/defective. Production time: 34293 h Spindle runtime: 36396 h Switch-on hours: 55709 h Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment (disabled) Bar Feeder Coolant Setup Conveyor

CNC Swiss lathe TNL12/7 with bar loading magazine and fire protection equipment for oil processing Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment Bar Feeder Coolant Setup Conveyor Production time: 36150 h

CNC Swiss Automatic Lathe with Bar Feeder - Main spindle with C-axis - Holder for driven guide bush max. passage 26 mm - Sub-spindle with C-axis - Workpiece ejection device - Tool carrier at the bottom with 12 driven tool carriers - Tool carrier at the top with 12 driven tool carriers - x3 transverse axis for front apparatus/sub-spindle - Front apparatus 5-way with Z3 carriage - Tapping side processing station - Workpiece removal device - Hinged belt chip conveyor - Coolant system - Setup for deep drilling - Fire protection device for processing with cutting oil - Traub Tool Monitoring TX8i - FMB bar loading magazine

Traub TNX 65/42 CNC rod lathe/ BJ 2007/ TX8i-S control/ incl. chip conveyor, coolant lubricant preparation and extraction  ...

• more information

Inv. Num. : 7973 Type: A 15 Producer: TRAUB Created: 2021 Parameters: Maximum spindle speed: 6500 1/min Spindle bore: 15 mm Length: 1300 mm Width: 1000 mm Height: 1600 mm Weight: 700 kg  ...

• more information

Main spindle: speed: 7000 rpm, power: 7.2kW. Counter spindle: speed: 7000 rpm, max. chuck diameter: 26mm, feed path: 330mm. Turning length: 270mm, spindle clearance: 26mm. X-axis: rapid traverse: 12000mm/min, feed path: 80mm. Z-axis: rapid traverse: 15000mm/min, feed path: 270mm. Y-axis (slide S1): Rapid traverse: 7500mm/min, feed path: +/-18mm. Tool positions: 2x12, tool holder: VDI 25, chisel cross-section: 16mm/16mm. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/1850mm, weight: approx. 3550kg, control: Traub System TX 8F. Including bar loader Stamag 26. Unusual noises can be heard when moving the V1 axis. Documentation available. On-site inspection is possible.

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price  ...

• more information