We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12
Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930
full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heatin ...
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
Screw diameter: 60 mm Stroke volume: 905 cm³ Injection weight in polystyrene: 824g/hp Injection pressure: 2:300 bar Clamping force: 350 t Lights Tiebar spacing H x V: 710 x 710 mm Tool installation height min./max: 300 / 900 mm Opening distance: 1:000 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 75 Kw Total connected load: 106.0 kW Total weight: 16000 kg Dimensions L x W x H: 6.8 x 2.2 x 2.6 m Payment terms: 100 % before taking over the machine, net only
FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. ...
FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection m ...
Clamping force: 600kN, screw diameter: 30mm, platen dimensions: 525x507mm, clear width between tie bars: 355x355mm, min. mould installation height: 200mm, opening stroke: 420mm, connected load: 21.4kW, operating hours: 41,876h, with documentation and maintenance reports, without accessories, has been regularly serviced, on-site inspection is possible.
Clamping force: 600kN, screw diameter: 30mm, platen dimensions: 525x507mm, clear width between tie bars: 355x355mm, min. mould installation height: 200mm, opening stroke: 420mm, connected load: 25.5kW, with documentation and maintenance reports, without accessories, has been regularly serviced, on-site inspection is possible.
Screw diameter: 40 mm Displacement: 251 cm³Injection weight in polystyrene: 229 g/hp Injection pressure: 2,494 bar Clamping force: 155 t Lights tie bar distance H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening path: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 2 Pump drive power: not applicable Total connection load: 79.0 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Terms of payment: 100% before taking over the machine, strictly net