Control Fagor Turning diameter ... 790mm Rotation length... 1500mm Spindle bore.. 82mm Circulation diameter via support ... 310mm Circumferential diameter above bed ... 550mm Axis X ... 300mm Axis Z ... 1650mm Spindle speed ... 80-2400 rpm. Rapid traverse of the X axis ... 15m/min Rapid traverse of the Z axis ... 15m/min Main engine power ... 11/15.5kW L x W x H ... 3690 x 2225 x 2050mm Machine weight... 4400kg The machine is in good condition, possible to test under electricity.

Control Heidenhain ... TNC 530 Spindle diameter ... 110mm Axis X ... 2000mm Axis Y ... 2000mm Spindle speed ... 10-3000 rpm cooling ... 20bar Axis W ... 730mm Axis Z ... 1250mm Number of positions in the tool changer ... 20 ISO 50 Clamping table surface ... 1250x1400mm L x W x H ... 4370 x 3850 x 3600mm Machine weight ... 24050kg Max. workpiece weight ... 5000kg The machine is in good condition, possible to test under power.

Travel X/Y/Z: approx. 4000mm/1000mm/1600mm, swivel A/C: +/-180°, feed X/Y/Z: 30m/min, tool slots: 30, spindle: SK50, speed: 5000rpm, spindle torque: 2338Nm, ram cross-section: 420mm/460mm, motor power: 78kW, table dimensions X/Y: 4200mm/1000mm. Machine dimensions X/Y/Z: approx. 8700mm/5600mm/4200mm. Documentation available.

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

spindle diameter: 130 mm x-travel: 12000 mm y-travel: 3500 mm Control: Hidenhain type: ITNC 530 ram: horizontal adjustment: 700 mm Spindle travel W-axis: 800 mm engine output: 52 kW turning speeds: 3000 U/min Plate area: 6000x4500 mm angular milling head: spindle stroke - max.: 700 mm rotary table:: 3000x3000 mm table load capacity: 40000 kp Tool changer: 40 Pos. coolant: magnetic cut-off: chip conveyor: central lubrication: total power requirement: 170 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc 0iMate control system, hydraulically operated chuck 250 mm, tailstock, 6-position turret, turning diameter/length 500/1390 mm ...

• more information

Inv. Num. : 6845 Type: SF 55/1000 Producer: Fermat Created: 2007 Parameters: Control system: FAGOR Max. turning length: 1000 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 310 mm Maximum spindle speed: 80-3500 1/min Maximum workpiece weight: 2000 kg Number of tool head positions: 8 Spindle bore: 82 mm Spindle taper: MORSE 5 Lathe chuck diameter: 300 mm Axis X: 300 mm Z axis: 1150 mm Engine power: 11/15.5 kW Weight: 3800 kg Equipment: Rear knife holder Fixed bezel Front panel

Fermat VLC 1600 ATC Carousel Lathe, Year of manufacture 2007, Control Siemens, Face plate Ø 1,600 mm, powered tools, max. Ø face turning 1,800 mm, Ww 16-speed, max. slide stroke 900 mm, max. stroke crossbeam 800 mm, Requested. Tools up to 2,400 rpm, Conveyor connected load 130 KVA, Machine 29,000 kg,

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Way ...

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.