- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet

Control Siemens 810 D with shopmill Travel X/Y/Z 420/330/240 mm Speed 5000 1/min Tool magazine for 12 tools SK 40 Table surface 850x325 mm Weight 2900 kg  ...

• more information

Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter,

emco VMC 300 - CNC milling machine - SIEMENS Sinumerik 810D CNC control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant device - 28700 operating hours - Year of construction 2004 Specification Workspace: - Carriage path longitudinal X: 420 mm - Carriage path transverse Y: 330 mm - Usable slide path vertical Z: 240 mm - Workpiece dimensions LxWxH: 400 x 300 x 190 mm - Spindle nose/table surface distance: 210 - 450 mm Milling Table: - Clamping surface LxW: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% ED): 9 / 11 kW - Speed range (infinitely adj ...

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. ...

• more information

Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed forc ...

turning diameter: 700 mm turning length: 3000 mm control: Siemens 840 D total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

CNC Cycle Lathe with Driven Tools Emco Emcomat E300/3000 Year of manufacture 2007 Fagor 8055T CNC Cycle Control Swing diameter over bed 550 mm Swing diameter over support 340 mm Turning length 3,000 mm Spindle bore 108 mm Bar passage 98 mm Spindle drive power 11.5 / 16.5 kW Spindle speeds 0 - 2,500 rpm. Chuck diameter 315 mm C-axis on the spindle 0.001° 6-Fold Vertical Tool Turret Driven tool positions max. 6 Tailstock quill diameter 100 mm Tapping Thread Repair Cycle Very good condition Offer number L-4870

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm  ...

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm& ...