turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate /  ...

turning diameter:200 mm swing diameter:260 mm turning height:60 mm  ...

• more information

This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, its ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us.

This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or w ...

Working range Diameter of the legs: 350 mm Rotation diameter: 360 mm X-trajectory: 725 mm Z-trajectory: 547 mm Y-trajectory: 307 mm Main spindle Spindle flange in accordance with DIN 55026: size 8 Spinning bearings - ? front: 120 mm Maximum speed: 6000 rpm Main drive AC motor 40% ID: kW 45 Maximum power: 58 kW Full power from spindle speed: 480 rpm Moment 40% ID: 480 Nm Maximum moment: 620 Nm Transport drive High speed X/Y/Z: 45/45/30 m/min Transport force in X/Y/Z: 5,5/11/11 KN Ball roller spindle in X/Y/Z: 40 mm Revolver star Intake cylinder shaft DIN 69880: 4 gang Shaft ? 40 mm Grinding spindle 1: HSK C63, U/min 9.000, kW 19 Grinding spindle 2: HSK C32, U/min 42,000, kW 7.5 hydr. Grinding ...

max. swing over bed: 260 mm max. turning diameter: 315 mm control: SIEMENS 840D spindle bore: 50 mm spindle diameter in front bearing: 100 mm Torque: 460 Nm chucking diameter: 200 / 250 mm with 1-bed slide: number of cross-slides: 1 tool taper: HSK C63 numbers of positions in the tool changer: 12 max. tool diameter: 40 mm Dimensions (L x W x H): 5.500 x 11.600 x 3.300 mm weight of the machine: 12.500 kg 6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | ...

turning diameter:175 mm turning height:70 mm chucking diameter:175 mm  ...

• more information

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. ...

• more information

It is a CNC-VSC 400 turning grinding center from EMAG: CNC machining center EMAG VSC 400 DDS, 2-spindle, year 2006, AL: 50kW, weight 13,000kg, control Siemens 840D, Chip conveyor brand Sermeto, attached extraction unit IFM, separate cooling and lubricant preparation DGS with belt filter and cooling tower HYFRA