Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and t ...

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping cost ...

Wire heating machine (From a Plant for fire aluminizing steel wire) Wire heating is inductive, 12 wires are heated simultaneously by a coil. The frequency of the inductor is tuned to 12 wires. To prevent interference with the HF generator, at least 10 wires must be moved within the coil. Inside the inductor, the wires are guided through 12 ceramic tubes which are mounted inside the induction coil. The ceramic tubes prevent contact with the coil. To prevent the ceramic tubes from breaking, the wires should be guided through the tubes as centred as possible. The wires are heated to coating temperature inside the inductor and the temperature is measured using a radiation thermometer (pyrome ...

Units available : 2 Manufacturer: GEA-TDS Ahaus Model: VTE 54-2.0 Year : 2015 Type : Tubular heat exchanger Type of fluid : gas / steam / superheated fluids Materials : 316L stainless steel Exchange surface area: 4.4 m2 Volume A : 12.5 L Volume B: 18.3 L Temperature A: 150?C min Temperature B: 190?C max Pressure A: 23 bars Pressure B: 12 bars   Length: 200 cm Diameter: ? 22 cm

Tubular heat exchanger mounted skid allowing to thermoregulate (heat, cool, maintain) a heat transfer fluid via a secondary circuit with 3 entries. Very often associated with a filter dryer or reactor when there is an issue / risk of product contact. Primary circuit : Heat transfer fluid loop Volume: 3.5L Pressure: +6 bars T?C = 150?C Secondary circuit : Number of inlets: 3, with one loop dedicated to steam Volume: 14.5L Pressure: -1/+6 bars T?C = 150?C Steel extension vessel Pump 15 m3/h Year 2006

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• more information

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• more information

including accessories and table, dimensions: L 60 x W 60 x H 82 cm ...

• more information