Closing unit Clamping force t: 200 Opening path mm: 750 Holm size mm: 560 x560 Installation height min/max mm: 300 Plate size: 830 x830 Spraying unit Screw diameter mm: 60 Spray weight gr: 540 Spray volume cm3: 636 Spray pressure bar: 1575 Dimensions and weights Dimensions LxWxH m: 6.6 x 1.8 x 2.1 Machine Weight Kg: 10200 Other Battery Euromap12

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heatin ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection m ...

Screw diameter: 40 mm Displacement: 251 cm³Injection weight in polystyrene: 229 g/hp Injection pressure: 2,494 bar Clamping force: 155 t Lights tie bar distance H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening path: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 2 Pump drive power: not applicable Total connection load: 79.0 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Terms of payment: 100% before taking over the machine, strictly net

Screw diameter: 22 mm Stroke volume: 29 cm³ Injection weight in polystyrene: 26 g/hp Injection pressure: 1,939 bar Clamping force: 50 t Lights Tie bar spacing H x V: 320 x 320 mm Tool installation height min./max: 150/ 410 mm Opening distance: 260 mm CONTROL: Mosaic Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 1 Pump drive power: no installed heating power: 4.8 kW Total weight: 3,200 kg Dimensions L x W x H: 4.0 x 1.6 x 1.9 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 140 g/hp Injection pressure: 1,943 bar Clamping force: 110 t Lights Tiebar spacing H x V: 420 x 420 mm Tool installation height min./max: 150/ 480 mm Opening distance: 350 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: no installed heating power: 11.2 kW Total weight: 5,500 kg Dimensions L x W x H: 4.6 x 1.6 x 2.0 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 35 mm Stroke volume: 173 cm³ Injection weight in polystyrene: 158 g/hp Injection pressure: 2,445 bar Clamping force: 155 t Lights Tie bar spacing H x V: 520 x 520 mm Tool installation height min./max: 200 / 590 mm Opening distance: 440 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / german FHK interface for robots: Yes Core pull: 0 Pump drive power: no installed heating power: 13.1 kW Total weight: 7,800 kg Dimensions L x W x H: 5.5 x 1.6 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Screw diameter: 90 mm Stroke volume: 2,545 cm³ Injection weight in polystyrene: 2,188 g/hp Injection pressure: 1,917bar Clamping force: 800 t Lights Tiebar spacing H x V: 1,400 x 1,080 mm Tool installation height min./max: 400/1200 mm Opening distance: 2,250 mm CONTROL: Mosaic Screen text: german / english Instruction manual: german FHK interface for robots: Yes Core pull: 6 Pump drive power: 130 kW installed heating capacity: 55 kW Total weight: 40,000 kg Dimensions L x W x H: 9.9 x 3.1 x 2.9 m Payment terms: 100 % before taking over the machine, net only